FRONT & MIDDLE PAD - MITU BAMBOO
FRONT & MIDDLE PAD - MITU BAMBOO
4-PT FOIL MOUNT ADAPTER
The 4-point foil mount adapter is specifically designed to work with the ROCKET AIR’s 4-point system. This adapter lets you mount any top plate to the ROCKET AIR, and thus allows you to ride this board with any foil on the market. No screws are included with this adapter.
THRUSTER SET F-ONE FLOW XS CARBON - MINT
THRUSTER SET F-ONE FLOW XS CARBON - MINT
MONOBLOC TAIL XXXS 190 DW
Monobloc Tail DW XXXS 190 + Monobloc Tail DW XXS 210 The Monobloc Tails DW provide improved speed, greater stability and better forward projection, greatly enhancing the efficiency and fun of your downwinds, as you perform better with less fatigue. The monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, more stable, and faster. The monobloc also removes two screws: you’ll be on the water faster! The High Modulus Carbon fiber layup used for this Monobloc Tail leads to even more rigidity and dependability that will propel you to incredible performances in each session.
MONOBLOC TAIL XXS 210 DW
Monobloc Tail DW XXXS 190 + Monobloc Tail DW XXS 210 The Monobloc Tails DW provide improved speed, greater stability and better forward projection, greatly enhancing the efficiency and fun of your downwinds, as you perform better with less fatigue. The monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, more stable, and faster. The monobloc also removes two screws: you’ll be on the water faster! The High Modulus Carbon fiber layup used for this Monobloc Tail leads to even more rigidity and dependability that will propel you to incredible performances in each session.
CARBON MAST 16 - 80 CM
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. It features both a new integrated top plate and TITAN mast foot at the bottom. This full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Available in 80cm and 85cm, this mast is perfect for all things foiling, and offering top-of-the-range performance in all conditions. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.
HM CARBON MAST 14 - 75 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
HM CARBON MAST 14 - 80 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
MAX FLOW F-ONE PUMP
Quick, efficient, and effortless inflation thanks to optimized airflow Two inflating speeds: single/double action switch Removable handle tips and retractable base stands Protected pressure gauge for accurate inflation Anti-sand seals to increase the pump’s efficiency and durability Ergonomic handles Supplied with 4 adapters to fit different valves, including inflatable SUP types Leash to secure your kite/wing while inflating Weight : 1.43 kg 2.5 L Max pressure: 13 PSI. Dimensions (base stands folded & handle tips removed): 51 x 17 x 17 cm Dimensions (base stands down & handle tips on): 51 x 29 x 17 cm
UNIBOX 50MM - SLATE
The fixing is done by the heel of the fin in a box that is placed on the upper part of the board. The originality of the system is that the screw is not integrated into the thickness of the fins, allowing them to remain thin and therefore reduce their drag. The fin and box take the board in sandwich, so it can keep a reduced thickness and all its flex. The flex of our UNIBOX fins is a unique element for a twin-tip. The boards are softer in navigation but also in landing jumps, they have less tendency to stall. The edge taking is more progressive. Our system allows you to gain in glide and planning start thanks to the asymmetrical thin profile and improves comfort thanks to the flex. To respect the direction of the asymmetrical profile and install the fins correctly, they have a marked colour code on their heel (red and green). This colour is found in the female part of the boards. A notch on the box has been added to allow a board leash to be attached.
UNIBOX 35MM - SLATE
The fixing is done by the heel of the fin in a box that is placed on the upper part of the board. The originality of the system is that the screw is not integrated into the thickness of the fins, allowing them to remain thin and therefore reduce their drag. The fin and box take the board in sandwich, so it can keep a reduced thickness and all its flex. The flex of our UNIBOX fins is a unique element for a twin-tip. The boards are softer in navigation but also in landing jumps, they have less tendency to stall. The edge taking is more progressive. Our system allows you to gain in glide and planing start thanks to the asymmetrical thin profile and improves comfort thanks to the flex. To respect the direction of the asymmetrical profile and install the fins correctly, they have a marked colour code on their heel (red and green). This colour is found in the female part of the boards. A notch on the box has been added to allow a board leash to be attached. The 35 mm fins and their thin profiles offer speed and an improved glide for the freestylers looking for less drag.
ALU MAST 45 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 55 CM
The F-ONE aluminum mast can be used for all disciplines: kite foil, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 65 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 75 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 85 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 95 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 80 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
