MAGMA Women Meteor - FZ 4,3mm
Infos & Characteristics The MAGMA 4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MEN SEAFARER - FZ 3.2mm
Infos & Characteristics The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
ROCKET AIR
SLICE BAMBOO FOIL
The compact format, the thin rails, the pronounced kick on the rocker and the profound channel on the bottom are the perfect attributes to strapless freestyle. The board brings a powerful natural pop, is easy to maneuver in the air, and offers soft and stable landings. With its fairly parallel outline, the SLICE BAMBOO FOIL planes with ease and its upwind abilities are remarkable. With these straighter rails and flatter rocker, accelerations are easier and movement through the water faster and more efficient, even in mellow waves. The thin rails also bring great control and smooth edging through the chop. Predictable and fun in surf, this board is incredibly accessible, and its compact shape makes it very easy to turn in the smaller waves. The transition from rail to tail is soft, which makes the shift from edging to carving effortless and leads to easier turn initiations. Along with the rounded nose, the bottom’s single channel with a double concave all help maintain float during tricks and offer better handling and more comfort in the waves. The SLICE BAMBOO FOIL has an efficient and reliable bamboo construction, using the natural properties of bamboo veneers. This board is built with a full bamboo layer on the bottom and two on the deck as extra reinforcement for durability. With the addition of Twin-Tracks, the SLICE BAMBOO FOIL is a fantastic two in one board. This board is available in three sizes: 5’1, 5’3 and 5’5. All are equipped with a tail pad, a fin set of Futures F4 437 Thruster, foot straps inserts, as well as deck inserts in the ideal location for a V-strap setup at the front to get the most out of your foiling. Adding a middle and front pad is also an option if desired. Accessible, versatile, and active in the water, the SLICE BAMBOO FOIL is great for riders new to directional, those looking for stability practicing transitions, and those wanting to do a little bit of everything like both smashing waves, performing tricks in the air, or enjoying a kite foil session. It is also best suited for small and medium-sized waves and excels when the conditions are onshore and the waves aren’t too powerful.
FW SK8 HM CARBON 750
• Aspect Ratio: 8.0 • Its outline makes it easy to turn and push hard during fast and controlled carves • The subtle balance of the lobe between maneuverability and glide allows to surf freely while maintaining efficient pumping • The wingtips’ design is made to hit the foam and breach the wingtip without turbulence or cavitation. • Its unique speed makes it a perfect foil for surfing from offshore swells to the shorebreak with a wing. • Our monobloc construction guarantees rigidity, durability, and extraordinary glide. The SK8 has been designed to surf. Its overall shape provides a fine balance between glide and maneuverability, which allows the user to tear a wave apart and then pump back to the peak effortlessly. It doesn’t just turn. It carves. Maneuverability is nothing without power, speed and control. Lay into turns with ease and speed, push through the carve and see how the SK8 holds a steady line and delivers even more speed. It is meant to stay in the pocket. With specific wingtips design, the SK8 is able to hit white water without too many turbulences, allowing surf-style turns and breaching pretty much any part of the foil. Carve, pump, fly. Take the SK8 for a wing ride, and you’ll feel a fast, easy-to-go-upwind foil that you can surf all the way from the offshore swell until the impact zone. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The SK8 comes in six sizes, ranging from 550cm² to 1050cm². The 550, 650 and 750cm² are recommended with the Monobloc Tail XXXS Carving 160. The 850cm² will be at its best when paired with the Monobloc Tail XXXS Carving 180, and the 950cm² and 1050cm² with the Monobloc Tail XXS Carving 200. With a thin profile and higher aspect ratio, the Monobloc Tail Carving range is the way to go if you need speed and maneuverability. These will provide a looser, more snappy feeling, as well as a faster pumping pace.
FW SK8 HM CARBON 850
• Aspect Ratio: 8.0 • Its outline makes it easy to turn and push hard during fast and controlled carves • The subtle balance of the lobe between maneuverability and glide allows to surf freely while maintaining efficient pumping • The wingtips’ design is made to hit the foam and breach the wingtip without turbulence or cavitation. • Its unique speed makes it a perfect foil for surfing from offshore swells to the shorebreak with a wing. • Our monobloc construction guarantees rigidity, durability, and extraordinary glide. The SK8 has been designed to surf. Its overall shape provides a fine balance between glide and maneuverability, which allows the user to tear a wave apart and then pump back to the peak effortlessly. It doesn’t just turn. It carves. Maneuverability is nothing without power, speed and control. Lay into turns with ease and speed, push through the carve and see how the SK8 holds a steady line and delivers even more speed. It is meant to stay in the pocket. With specific wingtips design, the SK8 is able to hit white water without too many turbulences, allowing surf-style turns and breaching pretty much any part of the foil. Carve, pump, fly. Take the SK8 for a wing ride, and you’ll feel a fast, easy-to-go-upwind foil that you can surf all the way from the offshore swell until the impact zone. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The SK8 comes in six sizes, ranging from 550cm² to 1050cm². The 550, 650 and 750cm² are recommended with the Monobloc Tail XXXS Carving 160. The 850cm² will be at its best when paired with the Monobloc Tail XXXS Carving 180, and the 950cm² and 1050cm² with the Monobloc Tail XXS Carving 200. With a thin profile and higher aspect ratio, the Monobloc Tail Carving range is the way to go if you need speed and maneuverability. These will provide a looser, more snappy feeling, as well as a faster pumping pace.
FW SK8 HM CARBON 950
• Aspect Ratio: 8.0 • Its outline makes it easy to turn and push hard during fast and controlled carves • The subtle balance of the lobe between maneuverability and glide allows to surf freely while maintaining efficient pumping • The wingtips’ design is made to hit the foam and breach the wingtip without turbulence or cavitation. • Its unique speed makes it a perfect foil for surfing from offshore swells to the shorebreak with a wing. • Our monobloc construction guarantees rigidity, durability, and extraordinary glide. The SK8 has been designed to surf. Its overall shape provides a fine balance between glide and maneuverability, which allows the user to tear a wave apart and then pump back to the peak effortlessly. It doesn’t just turn. It carves. Maneuverability is nothing without power, speed and control. Lay into turns with ease and speed, push through the carve and see how the SK8 holds a steady line and delivers even more speed. It is meant to stay in the pocket. With specific wingtips design, the SK8 is able to hit white water without too many turbulences, allowing surf-style turns and breaching pretty much any part of the foil. Carve, pump, fly. Take the SK8 for a wing ride, and you’ll feel a fast, easy-to-go-upwind foil that you can surf all the way from the offshore swell until the impact zone. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The SK8 comes in six sizes, ranging from 550cm² to 1050cm². The 550, 650 and 750cm² are recommended with the Monobloc Tail XXXS Carving 160. The 850cm² will be at its best when paired with the Monobloc Tail XXXS Carving 180, and the 950cm² and 1050cm² with the Monobloc Tail XXS Carving 200. With a thin profile and higher aspect ratio, the Monobloc Tail Carving range is the way to go if you need speed and maneuverability. These will provide a looser, more snappy feeling, as well as a faster pumping pace.
FW SK8 HM CARBON 1050
• Aspect Ratio: 8.0 • Its outline makes it easy to turn and push hard during fast and controlled carves • The subtle balance of the lobe between maneuverability and glide allows to surf freely while maintaining efficient pumping • The wingtips’ design is made to hit the foam and breach the wingtip without turbulence or cavitation. • Its unique speed makes it a perfect foil for surfing from offshore swells to the shorebreak with a wing. • Our monobloc construction guarantees rigidity, durability, and extraordinary glide. The SK8 has been designed to surf. Its overall shape provides a fine balance between glide and maneuverability, which allows the user to tear a wave apart and then pump back to the peak effortlessly. It doesn’t just turn. It carves. Maneuverability is nothing without power, speed and control. Lay into turns with ease and speed, push through the carve and see how the SK8 holds a steady line and delivers even more speed. It is meant to stay in the pocket. With specific wingtips design, the SK8 is able to hit white water without too many turbulences, allowing surf-style turns and breaching pretty much any part of the foil. Carve, pump, fly. Take the SK8 for a wing ride, and you’ll feel a fast, easy-to-go-upwind foil that you can surf all the way from the offshore swell until the impact zone. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The SK8 comes in six sizes, ranging from 550cm² to 1050cm². The 550, 650 and 750cm² are recommended with the Monobloc Tail XXXS Carving 160. The 850cm² will be at its best when paired with the Monobloc Tail XXXS Carving 180, and the 950cm² and 1050cm² with the Monobloc Tail XXS Carving 200. With a thin profile and higher aspect ratio, the Monobloc Tail Carving range is the way to go if you need speed and maneuverability. These will provide a looser, more snappy feeling, as well as a faster pumping pace.
SWING V5
The SWING has been designed to provide the best possible sensations, while guaranteeing comfort and lightness. Building on the success of past editions, this fifth SWING is even more intuitive, benefiting from improved stability, ease of use and balance. Its incredible stability gives you total control of the foil so you can make the most of your time on the water. Its excellent upwind ability makes it easy to get a downwind run started, where its ideal neutral position in freefly lets you concentrate fully on your trajectories and the swell. The SWING’s compact design and reduced wingspan make the wing lighter, facilitate pumping for planing starts, bring exceptional maneuverability, and allow you to ride with your arms lower, perfect for smaller riders. This fifth SWING also inherits the forward traction of our latest STRIKE, transforming your session and getting you up on foil in an instant. The new design of this fifth SWING also leads to greater efficiency and comfort in the high end, while maintaining an excellent planing start thanks to an effective and intuitive pumping. The new radial cut and longer Load Diffuser minimize wing deformation and ideally distribute tensions. This SWING also features our innovative Sweep Control Panel that regulates trailing edge tension, ensuring stability, upwind abilities, speed and sustained performance overtime. This Sweep Control Panel, in HITEX 178g on this model, ideally reinforces the front part of the leading edge and helps control its rearward deformation, while maintaining lateral flex for comfort and energy transfer during pumping. The SWING excels in all types of wind and conditions, from low to high end, offering better control during acceleration and at high speeds, making it possible to handle choppy or rougher seas and make the most of the waves. The optimized strap positioning enables a single Carbon Boom to fit multiple sizes and wing models across the entire F-ONE wing range. Whether you’re chasing waves or downwinding, the SWING is the ideal choice thanks to its accessible performance and perfect balance, offering lightness, stability and comfort for a controlled and intuitive ride at all times.
CARBON BOOM - STRIKE V4
SEAFARER Neo top 2mm
We design our neoprene tops like we design our wetsuits: in 3D. It fits like a second skin so you can forget about it as soon as you’re on the water. We only use premium materials: our high-quality tops are made to be warm, because there’s nothing more frustrating than being cold in summer. It's a no-bullshit top with Manera’s renowned fit and construction that will be your favourite partner all summer long. X10D jersey: Being in direct contact with the skin, the inside jersey is a key part of the top. Our X10D fabric not only provides maximum stretch and lightness, but also a smooth, silky feeling on the skin. Designed in 3D: MANERA hood are directly designed on a model in a Kitesurf-specific position, for a much more natural feeling while riding.
PLANE EAGLE X UHM CARBON 900 (MONOBLOC XS 145 DW)
The breathtaking speed of our famous EAGLE has been multiplied; this new foil gains both average and top speed. With the EAGLE X, you'll harness the ocean's energy like never before and be amazed at its incredible performance. The EAGLE X is optimized to reach the highest possible speeds while maintaining a very high average speed. Its low end has been specially designed for easy take-offs and comfort in the air. Its glide allows you to fly without stalling, even if you make a small mistake. Instead of focusing on the low or high end, we've worked on increasing the overall speed range of this foil. As a result, the EAGLE X can go very fast as well as very slow, enabling comfortable and easy downwinders with a high average speed. The EAGLE X's highly recognizable outline has been particularly refined. Most of the foil's surface area is distributed in the center, creating fairly narrow wingtips. This distribution of surface area ensures excellent maneuverability, especially for such a high AR. Hence, the EAGLE X isn't just a fast foil, it's also a fun foil to carve with! Moreover, the narrow wingtips make it easy to get the tips out without turbulence or cavitation. Finally, the wingtips are still fitted with winglets to reduce induced drag to a minimum. The EAGLE X offers a fantastic glide, capturing the slightest energy from the ocean and using it to move forward. It's capable of weaving through small chops as well as speed across long swells, allowing you to wander and explore during your runs like never before. Every pumping movement is transformed into forward energy, making this foil painless to ride, even for a few hours. Built using the Monobloc structure with pre-preg carbon, the foil is both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The Ultra High Modulus (UHM) carbon provides maximum stiffness for greater performance and incredible control thanks to instant feedback. The TITAN connection allows to plug in either an aluminum or carbon mast. The EAGLE X is best suited to advanced users looking for performance or new glide sensations. Whether wing foiling or SUP foiling, this foil promises a whole new range of sensations that only it can offer.
PLANE EAGLE HM CARBON 890 (MONOBLOC XXS 170 DW)
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping. Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The EAGLE is available in seven sizes, from 690 cm² to 1290 cm². The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide. * Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
PLANE EAGLE HM CARBON 990 (MONOBLOC XXS 170 DW)
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping. Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The EAGLE is available in seven sizes, from 690 cm² to 1290 cm². The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide. * Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
PLANE EAGLE HM CARBON 1090 (MONOBLOC XXXS 190 DW)
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping. Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The EAGLE is available in seven sizes, from 690 cm² to 1290 cm². The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well. * Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
PLANE EAGLE HM CARBON 1190 (MONOBLOC XXS 210 DW)
Aspect Ratio: 8.0 New carbon layup for enhanced sensations and performance Its outline makes it easy to turn and push hard during fast and controlled carves The subtle design of the lobe between maneuverability and glide allows to surf freely while maintaining efficient pumping The wingtips’ design is made to hit the foam and breach the wingtip without turbulence or ventilation Its unique speed makes it a perfect foil for surfing from offshore swells to the shorebreak with a wing Our monobloc construction guarantees rigidity, durability, and extraordinary glide New carbon layup. Thanks to in-depth research, rigorous testing and the know-how of our R&D team, the SK8's new carbon layup delivers higher speeds while guaranteeing perfect control and greater stability. Turns become smoother, rail-to-rail transitions more precise, and the foil’s roll motion is improved, offering exceptional maneuverability. More predictable, the new SK8 delivers constant power, making it super intuitive to control. The use of High Modulus Carbon, integrated into F-ONE's Dynamic Structural Design, leads to even more rigidity and dependability. Finally, this layup has been finely tuned and optimized so that each foil size can deliver the best performance. The SK8 has been designed to surf.Its overall shape provides a fine balance between glide and maneuverability, which allows the user to tear a wave apart and then pump back to the peak effortlessly. It doesn’t just turn. It carves.Maneuverability is nothing without power, speed and control. Lay into turns with ease and speed, push through the carve and see how the SK8 holds a steady line and delivers even more speed. It is meant to stay in the pocket.With specific wingtips design, the SK8 is able to hit white water without too many turbulences, allowing surf-style turns and breaching pretty much any part of the foil. Carve, pump, fly.Take the SK8 for a wing ride, and you’ll feel a fast, easy-to-go-upwind foil that you can surf all the way from the offshore swell until the impact zone.
