TRIGGER V2 BY BRAINCHILD
With its five-strut, high aspect ratio design and outstanding light weight, the TRIGGER by Brainchild is super responsive and efficient, while featuring a very intuitive and direct handling. With its light steering pressure, this kite is a joy to fly, and it remains incredibly easy to always know where it stands with closed eyes. The fixed bridle system keeps the shape stable in the air in the entire wind range.The TRIGGER also stands out for its ability to send controlled loops with the right amount of boost. It catches you perfectly after every trick, and makes looping safe and easy for everyone, while allowing pros to perform double loops with ease.The TRIGGER by Brainchild features a new and exclusive panel layout concept, where the panels on the wingtip areas are all joint together into one panel, as well as the main panel between the tip and the S2 strut. This new panel design enhances the aerodynamic behavior of the kite, as well as reduces the amount of seams, therefore decreasing the weight even further.An exciting new opportunity is here with the advent of a new kite manufacturing facility in Northern Macedonia in Southeastern Europe, headed by Ralf Grösel. The production facility, named Brainchild, is distinguished by its adoption of state-of-the-art assembly technologies and an unprecedented commitment to sustainability, offering an environmental record unmatched in the kiteboarding world.Brainchild uses new, state-of-the-art, extra-light materials as well as innovative techniques like PROWELD – where all the segments of the leading edge are welded together rather than stitched, which leads to an overall increased stiffness of the kite and even further weight reduction. Moreover, the kites are now digitally printed instead of using typical screen-printing processes. The freedom offered by this printing process allows us to explore new and unique graphics and colors.
LINX BAR 4 LINES 2025 - SK99
The new SK99 lines offer increased durability and greater resistance to abrasion and elongation. Thanks to these new lines, the performances and connection with the kite are greatly enhanced, and the bar feedback is more direct and precise. The new removable pigtail system allows for easier line extensions addition, and for improved repairability. The LINX BAR is our control system, a dual adjustable length bar that comes in two sizes (38/45cm and 45/52cm). It perfectly blends lower weight and simplicity with excellent comfort and function.
SEAFARER SHORTY - FZ 2.2mm (short sleeves - short legs)
The new SEAFARER SHORTY 2.2mm provides excellent freedom of movement while maintaining essential core warmth. It is packed with the same technologies as the HYBRID 2.2mm but features cropped sleeves and legs. Stretchy, comfortable, and robust, it is perfect for summer sessions in warmer waters. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, stretch, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-performance wetsuit at an affordable price, this is the right choice. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable
MAGMA Women Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
SEAFARER Hooded - FZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm Hooded is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER Hooded - FZ 5,4,3mm
The new SEAFARER 5.4.3 Hooded will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - FZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - FZ 3,2mm
The new SEAFARER 3.2mm is a high-quality summer wetsuit that is built with the same materials as a winter wetsuit, making it a perfect choice for these chilly mid-season days. This wetsuit features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - FZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER HYBRID - FZ 2,2mm (short sleeves - long legs)
The new SEAFARER SHORTY 2.2mm provides excellent freedom of movement while maintaining essential core warmth. It is packed with the same technologies as the HYBRID 2.2mm but features cropped sleeves and legs. Stretchy, comfortable, and robust, it is perfect for summer sessions in warmer waters. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, stretch, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-performance wetsuit at an affordable price, this is the right choice. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable
SEAFARER Women Hooded - FZ 5,4,3mm
The new SEAFARER 5.4.3 Hooded will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
SEAFARER Women - FZ 3.2mm
- Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER Women - FZ 4.3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER Women - FZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER Women - BZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Back Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER women HYBRID - FZ 3.2mm (long sleeves - short legs)
It’s very frustrating to be cold when riding in a warm place. That is why we designed our SEAFARER HYBRID to be warm. It is packed with the same technologies as the 3.2mm steamer: we basically just cut the legs. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, stretch, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-performance wetsuit at an affordable price, this is the right choice. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SOFT WING HANDLE
Bobby 5 panels
Our BOBBYs are no ordinary bobs. Built in the same fabric as our technical boardshorts, our BOBBY hats are made to be light, to dry fast and to resist against UV rays and saltwater. This 5-panel version features mesh panels on both sides to improve airflow and prevent overheating during the warm summer days. Its fit is also conceived for action: fitting closer to the head, the BOBBY 5-PANEL version will hold better in strong wind and waves than our standard BOBBY. It is meant to spend the day out there: Before, during and after your sessions.
SOCKS - X10D
At MANERA, we aim to keep you warm, all the way down to your feet! Discover our take on socks, with the thin and more flexible XTEND model. Made of 85% recycled materials, the XTEND socks offer stretch, comfort and hold perfectly. These socks are perfect for your everyday life, whether it’s going for a workout on a calmer day or winding down with your mates after a great session. Carry the “Stay Salty” vibe one step at a time!
SOCKS - Magma
At MANERA, we aim to keep you warm, all the way down to your feet! Discover our take on socks, with the warm, thick MAGMA model. Made of 85% recycled materials, the MAGMA socks offer stretch, comfort, and hold perfectly. These socks are perfect for your everyday life, whether it’s going for a workout on a calmer day or winding down with your mates after a great session on the water. Carry the “Stay Salty” vibe one step at a time!
ROCKET SURF
The ROCKET SURF is very balanced and maneuverable in all phases of foil surfing, helping you catch any waves. This board is responsive, stable, easy to take off with, and brings incredible control throughout the entire ride. The ROCKET SURF is now slightly narrower and longer, while retaining its timeless shape to bring out the purest surf sensations. This board is playful and easily maneuverable thanks to this compact shape. The well-proportioned outline allows an even volume distribution, which in turn brings stability both in the water and in the air. We have placed maximum volume under the rider’s chest to encourage an easy paddling and take-off. The rocker has also been adjusted to improve the front/back balance and pumping abilities. The new squash tail allows you to lean at a maximum angle during your turns in total control without touching the water. The double concave provides an easy release, even if the board touches the water while flying. The pronounced step on the hull and bevels also helps release from the water and reduces friction for improved take-off and stronger accelerations. The concave deck lowers your center of gravity and brings the feet closer to the foil, thus allowing you to naturally position yourself and to better control the board once in the air. It also helps to move your knees and feet through and to stand up while taking-off. The bamboo construction and the bamboo reinforcement on the deck create a highly resistant, durable, and light shell all-around. The size range of the ROCKET SURF has been revised and now includes six sizes, ranging from 4’3 (25L) to 4’11 (40L). We are also offering new sizes with different length/volume ratios: 4’3+ and 4’5+. These two boards are wider and, above all, thicker to offer an alternative with more volume for the same length for riders who don’t need to paddle out a lot. They hence may go for a shorter length for the same volume. All boards are equipped with a full pad and the Twin-Tracks system for foil compatibility. The ROCKET SURF doesn’t include strap insert from this year on.
HARD WING HANDLE
SIZES (cm) WEIGHT (kg) HARD HANDLE 28 28 0,29 HARD HANDLE 30 30 0,30 HARD HANDLE 37 37 0,32
HYBRID WING HANDLE
SIZES (cm) WEIGHT (kg) HYBRID HANDLE 28 28 0,14 HYBRID HANDLE 30 30 0,14 HYBRID HANDLE 37 37 0,14
HALO harness V2
The HALO 2.0 continues to offer our breakthrough "Adaptive Shell" technology, all in a harness you can trust. Following the recall concerning these parts, the “Adaptive skin”, “Pivot Inter” and “Pivot Exter” have been redesigned to provide a much higher resistance without compromising comfort. With your safety as our priority, thorough testing has been conducted at the factory, in the water, and inside our office’s lab, under the same protocol as for the Quick-Release ISO norm. In Halo 2.0 you'll find the two basic principles of our Halo range: The Softshell The softshell provides perfect adaptability to the user's body type and movements. But it becomes distorted under the pressure of the kite: The user's sides are compressed. It therefore has good adaptability, but little hold. The Hardshell The hardshell does not become distorted under the pressure of the kite: The user's sides are not compressed. But it has no adaptability to the user's body type and movements. It therefore has a very good hold, but little adaptability. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. - Adaptive skin - Hardshell - Softshell - Arc spreaderbar Adaptive shell : Our Research and Development approach is to create the best possible product, so we have sought to use the advantages of the two current technologies while eliminating their faults. This is how the “Adaptive Shell” was born. This patented technology is made up of two main parts: The Adaptive skin and the Hardshell. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. Adaptive skin : The Adaptive skin is a support skin made of a flexible material providing the user maximum adaptability and freedom of movement. It is directly in contact with the body; its function is to provide comfort. Hardshell : The Hardshell is a rigid arc; it prevents the harness from bending and thus compressing the user's body under the strong pressure of the kite. It is not in contact with the user nor with the back of the Adaptive skin; its function is to manage the mechanical pressure that the harness receives. Durability : A product is as durable as the least durable part of its components. The different components of a harness are often non-replaceable (sewn straps, glued foams, etc.) and certainly not recyclable. Therefore, sometimes a worn or damaged part forces you to throw away the entire product. In an effort to reduce our carbon footprint and in order to provide better customer service, all HALO components are assembled without glue or seams so that each part is easily replaceable. We stock spare parts and are able to replace each of them. The ARC spreaderbar, the sliding rope, and the kitenife are included with purchase. Direct contact : Thanks to our Adaptive shell technology, and in particular the very adaptable Skin part, there is no longer a need to use large, thick foam for comfort. The HALO's ultra-thin neoprene foam provides several advantages over a conventional harness: . A more direct feeling . Less bulky contact . Lighter, even when in the water Fitting : In order to optimize the customer experience, we have added two sizes: S+ and M+. These two new sizes are in fact the standard S and M harnesses equipped with longer spreaderbars. Why? Bodies may assume different shapes: . A more rounded shape (someone with a big belly) . A more oval shape (someone with wide hips). For the same waist size, we therefore have two completely different body types. By incorporating longer spreaderbars, sizes S+ and M+ are more suitable for people with wider hips. Leash attachement : Our kite leash attachment point is located towards the front of the harness, allowing easy and direct access for release in case of an emergency. Attached to the straps on the right-hand side by default, the metal ring can easily be moved to the left straps. W A R N I N G : NAISH leashes are not adapted to the size of our metal ring, and it could present a safety hazard during release. We are currently working on a new version of the ring. Arc spreaderbar : The ARC is a new generation spreaderbar developed to offer a more precise, comfortable navigation experience, with a harness that is better held in place.