,

MAGMA Hooded - FZ 6,4mm

The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

675.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA Hooded - FZ 5,4,3mm

The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

645.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA Hood 2mm

The MAGMA hood features a double flap: One stays outside the wetsuit collar while the other one comes inside. It creates a double barrier against water flushing and it makes sure the hood stays in place. We have used our Reflex-skin jersey to line the areas where we need mobility: Neck, face, chin. Head and ears are built in Glide-skin neoprene which is waterproof & windproof to fight the wind-chill effect. The inside is lined with our MAGMA PLUS for an unbeatable warmth and fast-drying. It’s the weapon of choice if you want to spend the winter without brain-freeze while still having a good mobility. Update: From the FW24 collection onward, all our hoods have been updated to have a bigger face opening. It provides more comfort and makes sure you can wear the hood under the chin without being too squeezed. - Magma Plus - Designed in 3D - Update Magma Plus : Our MAGMA material is one of the warmest on the market.  Besides, it is highly stretchable, which brings an unmatched  freedom of movement to the suits. Its plush loops work as effective insulators and heat generators  while providing a smooth and soft feeling that makes the suit  incredibly comfortable. It also dries extremely fast. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

95.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA Glove 2,5mm

The MAGMA LOBSTER gloves exist in 2.5mm and 5mm. These are made for really cold days, and for people prioritizing warmth over freedom of movement. The MANERA team has been working on glove designs for two winters now, trying to provide the best comfort-to-warmth ratio possible. After testing different types of patterns, we came up with the LOBSTER as the best one. Featuring less useless fabric and stitching than a classic design, the LOBSTER gloves are light and comfortable. Because most fingers stay together, you will feel much warmer than with traditional gloves. The separated thumb and index give a great grip and handling. This new design will have you happy to bring the gloves out when winter kicks in! - Magma Plus - Light & comfortable - Warm - Good Grip & Handling Magma Plus Our MAGMA material is one of the warmest on the market.  Besides, it is highly stretchable, which brings an unmatched  freedom of movement to the suits. Its plush loops work as effective insulators and heat generators  while providing a smooth and soft feeling that makes the suit  incredibly comfortable. It also dries extremely fast.

75.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA Cap 2mm

Protecting your head is key to a good session, but also in the long term to prevent “surfer’s ear”. Hoods are often not the most adapted tools for wind sports, as they can be kind of restrictive when you are always looking right or left. Caps do not cover the neck, and thus allow a better freedom of movement. They are great for the colder wing foiling and kiting days. The Magma Cap features glide skin to cut the wind chill, and Magma+ Fleece on the inside for warmth and fast drying. This is the ultimate accessory for cold and windy days. - Designed in 3D - Magma Plus Magma Plus : Our MAGMA material is one of the warmest on the market.  Besides, it is highly stretchable, which brings an unmatched  freedom of movement to the suits. Its plush loops work as effective insulators and heat generators  while providing a smooth and soft feeling that makes the suit  incredibly comfortable. It also dries extremely fast. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

70.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA Baselayer Hooded 0,5mm

The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - Magma hood - 2mm -  Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

220.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA Baselayer 0,5mm

The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

115.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA - FZ 5,4,3mm

The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

585.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

MAGMA - FZ 4,3mm

The MAGMA 4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out.   - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.

545.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page

LIFT wing harness

Free to freefly The low profile, soft outline and light construction of the LIFT provide a “like you’re wearing nothing” feeling. It won’t feel bulky during these freefly times, allowing you to glide as freely as always.   Adaptive Shell Being significantly smaller than a standard kite harness, the LIFT lays comfortably on your lower back. It features an adaptive shell inside that provides the necessary support even in these stronger, overpowered sessions. The soft neoprene outline ensures a comfortable transition between the support shell and the body, offering a smooth distribution of the loads across the back.   Sliding hook The hook can slide around the front strap, allowing you to move it left or right before laying on your board, thus preventing unwanted dings.   Leash attachments The harness features many strong attachments options for your wing and board leashes.   Kite knife pocket Why provide a kite knife for winging? Simply because an easily accessible knife can be a life saver if you (or your friend) get stuck in kite lines or in a fishing net.

125.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page

Leash belt

1. Premium 600D: The premium 600D Polyester construction provides durability against scratches and support for the back. 2. Front strap: The high quality and durable strap goes all around the belt in order to support very high loads.

55.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page

HALO harness V2

The HALO 2.0 continues to offer our breakthrough "Adaptive Shell" technology, all in a harness you can trust. Following the recall concerning these parts, the “Adaptive skin”, “Pivot Inter” and “Pivot Exter” have been redesigned to provide a much higher resistance without compromising comfort. With your safety as our priority, thorough testing has been conducted at the factory, in the water, and inside our office’s lab, under the same protocol as for the Quick-Release ISO norm. In Halo 2.0 you'll find the two basic principles of our Halo range: The Softshell The softshell provides perfect adaptability to the user's body type and movements. But it becomes distorted under the pressure of the kite: The user's sides are compressed. It therefore has good adaptability, but little hold. The Hardshell The hardshell does not become distorted under the pressure of the kite: The user's sides are not compressed. But it has no adaptability to the user's body type and movements. It therefore has a very good hold, but little adaptability. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. - Adaptive skin - Hardshell - Softshell - Arc spreaderbar Adaptive shell : Our Research and Development approach is to create the best possible product, so we have sought to use the advantages of the two current technologies while eliminating their faults. This is how the “Adaptive Shell” was born. This patented technology is made up of two main parts: The Adaptive skin and the Hardshell. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. Adaptive skin : The Adaptive skin is a support skin made of a flexible material providing the user maximum adaptability and freedom of movement. It is directly in contact with the body; its function is to provide comfort. Hardshell : The Hardshell is a rigid arc; it prevents the harness from bending and thus compressing the user's body under the strong pressure of the kite. It is not in contact with the user nor with the back of the Adaptive skin; its function is to manage the mechanical pressure that the harness receives. Durability : A product is as durable as the least durable part of its components. The different components of a harness are often non-replaceable (sewn straps, glued foams, etc.) and certainly not recyclable. Therefore, sometimes a worn or damaged part forces you to throw away the entire product. In an effort to reduce our carbon footprint and in order to provide better customer service, all HALO components are assembled without glue or seams so that each part is easily replaceable. We stock spare parts and are able to replace each of them. The ARC spreaderbar, the sliding rope, and the kitenife are included with purchase. Direct contact : Thanks to our Adaptive shell technology, and in particular the very adaptable Skin part, there is no longer a need to use large, thick foam for comfort. The HALO's ultra-thin neoprene foam provides several advantages over a conventional harness: . A more direct feeling . Less bulky contact . Lighter, even when in the water Fitting : In order to optimize the customer experience, we have added two sizes: S+ and M+. These two new sizes are in fact the standard S and M harnesses equipped with longer spreaderbars. Why? Bodies may assume different shapes: . A more rounded shape (someone with a big belly) . A more oval shape (someone with wide hips). For the same waist size, we therefore have two completely different body types. By incorporating longer spreaderbars, sizes S+ and M+ are more suitable for people with wider hips. Leash attachement : Our kite leash attachment point is located towards the front of the harness, allowing easy and direct access for release in case of an emergency. Attached to the straps on the right-hand side by default, the metal ring can easily be moved to the left straps. W A R N I N G : NAISH leashes are not adapted to the size of our metal ring, and it could present a safety hazard during release. We are currently working on a new version of the ring. Arc spreaderbar : The ARC is a new generation spreaderbar developed to offer a more precise, comfortable navigation experience, with a harness that is better held in place.

420.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

HAAPITI Women boardshort

KEY FEATURES 1- Velcro side-closure  The Haapiti women features a Velcro side-closure and adjustment system. This minimalistic design means that you can easily put it on and take it off as well as lie comfortably on the board, without the irritation of a bulky lace. 2- 4 way stretch  The 4 Way stretch brings style without scarifying flex 3- Water repellent  Your short stays light while riding and dries fast while on land for ultimate comfort. 4- Small pocket The shorts feature a small pocket on the front with a built-in key cord. TECHNOLOGIES  Water repellent : All of our boardshorts receive the same ultra-performing hydrophobic treatment: They stay light while riding and dry fast while on land for ultimate comfort. 4 way stretch :Think of a stylish boardshort with the characteristics of a technical one. The 4-ways stretch brings style without scarifying stretch, so you will enjoy your boardshort both in and out of the water. Strong and durable :Our boardshorts are not made to spend the day by the swimming-pool. The rip-stop construction of the Square-flex and the thick polyester yarn of the Haapiti will follow you everywhere all year-round.

60.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page

Fleece

Built in 100% recycled sherpa polyester, the MANERA fleece provides warmth and comfort before and after your sessions. This new fleece features a front full-length zipper, side pockets and a chest zippered pocket for convenient storage. Composition : Fleece : 100% recycled polyester Chest pocket : 94% recycled polyester & 6% elastane.

91.67
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page

EXO harness

It is difficult to improve a harness like the EXO, but the development of the ECLIPSE has taught us a lot and we have used this experience to redesign our star harness. We applied Adaptive Shell Technology to the EXO model to provide better support, reduced weight and increased durability. Thanks to a stiffer center area, the EXO perfectly supports the back. However, it allows greater freedom of movement thanks to its different levels of rigidity, especially its flexible outline. The soft part of the EXO is built in one “Single foam”. The single foam doesn’t absorb any water, so the harness stays light and comfy once in use. The harness comes with a standard hook, a rope and a knife. - Adaptive shell - Single foam - Tuck flap Adaptive shell : The Adaptive Shell stiffness shades from hard in the center area to softer on the edges. The stiff center-belt prevents the harness from folding and compressing your body while preserving a good lumbar support. The softer outline preserves intuitive mobility and adaptability. It results in a shell that is forgiving where you need flex and stiff where you want support. Single foam : Comfort is paramount in any harness; the UNION uses a single injection mould to make a one-piece foam backing. This makes it exceedingly durable, as there are less parts to be glued or stitched together. It absorbs far less water and is much lighter than the multiple foam layups used in some harnesses. Down hold system : Because there’s nothing worse than a harness that rides up during your sessions, we developed the DOWN HOLD SYSTEM, an asymmetrical attachment that distributes the forces downward. Secured in its original position, the hook does not ride back up. Tuck flap : The TUCK FLAPS further assist the DOWN HOLD SYSTEM using the flaps positioned on the ends of the spreader bar and inserted into the harness. Once the straps are tightened, they are compressed and locked. By stiffening the connection between the harness and the buckle, they prevent it from riding up. Leash attachement : Our kite leash attachment point is located towards the front of the harness, allowing easy and direct access for release in case of an emergency. Attached to the straps on the right-hand side by default, the metal ring can easily be moved to the left straps. W A R N I N G : NAISH leashes are not adapted to the size of our metal ring, and it could present a safety hazard during release. We are currently working on a new version of the ring. Arc spreaderbar : The ARC is a new generation spreaderbar developed to offer a more precise, comfortable navigation experience, with a harness that is better held in place.

390.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

ESKIMO PONCHO

We have fused our BLIZZARD with our high-quality ponchos in order to offer the ultimate winter accessory. The outside features a waterproof, windproof and light shell that protects you from the elements, while the inside towel provides extra warmth and keeps you dry. Whether you want to stay on the beach waiting for the conditions, or just use it as a poncho to change, the STORMY will be your best winter partner. The shell is 100% recycled. - Water / Wind repellent - Inner soft towel - Warm hand pockets - Big pockets - Nylon zipper

270.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page

ECLIPSE harness

Having worked on ergonomic designs for a while, our goal was to push our frame concept to more stiffness, allowing a better support of the back & a lower fit. But something 100% hard was not an option: Our back needs some adaptability & human morphology is unique. So here comes the ECLIPSE, a skilful balance between stiffness & flex that brings support where you need it and the freedom to move the way you want. The harness comes with a standard hook, a rope and a knife. - Adaptive shell - Gel foam - Tuck flap

425.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

CLASSIC - FZ 5,4,3mm

Price range: €0.00 through €265.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

CLASSIC - FZ 4,3mm

Price range: €0.00 through €250.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

CLASSIC - FZ 3,2mm

Price range: €0.00 through €240.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

CLASSIC - BZ 5,4,3mm

250.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

CLASSIC - BZ 4,3mm

235.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

CLASSIC - BZ 3,2mm

225.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
,

Bobby 5 panels

Our BOBBYs are no ordinary bobs. Built in the same fabric as our technical boardshorts, our BOBBY hats are made to be light, to dry fast and to resist against UV rays and saltwater. This 5-panel version features mesh panels on both sides to improve airflow and prevent overheating during the warm summer days. Its fit is also conceived for action: fitting closer to the head, the BOBBY 5-PANEL version will hold better in strong wind and waves than our standard BOBBY. It is meant to spend the day out there: Before, during and after your sessions.

50.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page