MITU PRO BAMBOO
With the compact outline, the single concave remains the DNA of the MITU PRO models. Its unique shape helps the board start planing early, accelerate in an instant, and brings stability and predictability in all conditions. The shape of the MITU PRO BAMBOO has been improved overtime with lateral flat sections on the bottom, as well as a flat section on the bottom between your front and back foot. The rocker line allows a better edge control and an overall improved feeling. The distinct swallow tail makes it very smooth to initiate turns and easy to carve with. Volume, stability, and float are perfectly balanced for a board that surfs better than ever before. The MITU PRO BAMBOO has an efficient and reliable bamboo construction, using the natural properties of bamboo veneers. This board is built with a full bamboo layer on the bottom and two on the deck as extra reinforcement for durability. This range features five sizes and goes from 5’2 all the way to 5’10. The larger sizes have a bit more emphasis on the planing abilities and general stability, while the smaller sizes focus more on maneuverability. All share the same shape features, with their specific outline to make the most of the wave’s energy. All sizes are equipped with a tail pad, foot straps inserts, and a fin set of Futures F4 437 Thruster. Adding a middle and front pad is also an option if desired.
WTF!?
This board was built around a wood core with glass reinforcement and carbon tapes for a better load transmission when loading up for the pop. This not only makes it incredibly durable, but it is also the secret to the smooth and controlled feel underfoot. The WTF?! board features a specific rocker line with a flatter section in the center to allow for early planing with increased rocker on the tips to keep those landings smooth and easy. The transition between the three stages of the rocker is key to the dynamics of edging and loading for the pop and reaching maximum amplitude. Every feature of the WTF?! has been built around not only giving the rider the most pop, but also making it easy to release it and control. The outline of the board is both versatile and comfortable. The board tips provide a huge platform for you to launch your tricks from, while also offering a stable landing area, no matter how hard you are coming in from a move. Inspired from our HRD rail design, the WTF?! uses thicker rails under the feet, offering maximum lift and balance while in the middle of the board. At the tips, the profile of the rail gets thinner for improved grip. The bottom of the board features a lot of shape details including a double concave step design, which is a central V-double concave, step channels in the sides and tip channels. These improve the grip and the release of water from the board and help you with speed and control at all times while you are on the water. These channels also break the surface tension of the water, making the landings smoother and more manageable, even at high speed. The deck of the board is totally flat to provide a more consistent connection to the board for your bindings, no matter what brand you choose. This helps with control and makes it easy to get bindings that fit the board. Once you are on the water, you will notice the speed at which the board travels and how effortless it is to ride. Pop is gained easily, and no matter your speed or the state of the water, you can be assured of a good take off every time you load up the edge. Landings are smooth, and the WTF?! has been designed to help you nail all your tricks with higher consistency than ever before. The board is available in five sizes: 140×42.5cm, 138x42cm, 136×41.5cm in the Slim construction with a thinner core leading to better flex for riders of a small stature, and 130×39 cm and 127×37 cm for the Next Generation. All sizes come equipped with four UNIBOX 50mm fins, which offer better speed and improved glide thanks to their thinner profile.
TRAX HRD CARBON SERIES WITH UNIBOX 50MM - SLATE
The exclusive Helical Rail Design (HRD) plays a significant role in this board’s exceptional performances. It is a unique process that allows for the rails of the board to be shaped in 3D. There are three sections to the rail as it runs the length of the board. In the middle of the board, the rail is thin for grip and improved upwind ability. Under the feet, the rail is inverted and curved like a surfboard rail, allowing the board to smoothly track through chop and improving its carving ability. As the rail reaches the tips, it thins out again, bringing superior grip and bite to give excellent pop. On the water, this board offers an instant feeling of speed and performance. The HRD rail eliminates spray and feels very comfortable regardless of the water conditions. The TRAX HRD CARBON benefits from a biaxial carbon full layer which drops the weight of the board. It also gives it extra strength, a stiffer ride, and a more powerful flex response. Its lightness makes it very responsive and is an absolute dream once in the air. The board’s flex has been tuned with the properties of carbon fiber to provide the best pop off the water, and the tips are exceedingly responsive, thus helping you when you load up the edge for take-off. When it comes to landings, the wide outline and channeled base combine to smooth things out and allow you to always retain control. The concave step design on the bottom, an association of a classic single concave with a full-length channel, gives the board its locked-in yet smooth ride, and allows you to go planing in an instant with strong upwind potential. Combining edge control, early planing, upwind ability and chop-friendly handling, the TRAX CARBON is an excellent choice for beginners, experts, and everyone in between. The stiff ride and explosive pop make this board well suited to the more freestyle-oriented riders looking for bigger airs and longer sessions. From flat water to harsh chop, this precise board can handle it, and you’ll get a ride like no other with plenty of performance at your disposal and in full confidence. The TRAX HRD CARBON is available in four sizes: 135×39 cm, 136×40.5 cm, 137×42 cm, and 140×45 cm. All come equipped with four UNIBOX 50mm fins, which offer better speed and improved glide thanks to their thinner profile.
MAGMA Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA - FZ 4,3mm
The MAGMA 4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Lobster Glove 2,5mm
The MAGMA LOBSTER gloves exist in 2.5mm. These are made for really cold days, and for people prioritizing warmth over freedom of movement. The MANERA team has been working on glove designs for two winters now, trying to provide the best comfort-to-warmth ratio possible. After testing different types of patterns, we came up with the LOBSTER as the best one. Featuring less useless fabric and stitching than a classic design, the LOBSTER gloves are light and comfortable. Because most fingers stay together, you will feel much warmer than with traditional gloves. The separated thumb and index give a great grip and handling. This new design will have you happy to bring the gloves out when winter kicks in! - Magma Plus - Light & comfortable - Warm - Good Grip & Handling Magma Plus : Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast. Light & Comfortable : Because the glove doesn’t go around every single finger, we use less fabric, less stitching, and the overall design is less bulky. It results in a glove that doesn’t sacrifice comfort for warmth. Warm : Because most fingers stay together you will feel much warmer than with traditional gloves. Good Grip & Handling : Having separated the thumb and index, we made sure that this new shape doesn’t compromise grip/handling, as a mitten could. Don’t stress about your take-off or how you will handle the kite bar and the wing handles, it won’t be different from traditional gloves. We have also added a puller inside to pull these on easily. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted gloves in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA gloves stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Lobster Glove 5mm
The MAGMA LOBSTER gloves exist in 5mm. These are made for really cold days, and for people prioritizing warmth over freedom of movement. The MANERA team has been working on glove designs for two winters now, trying to provide the best comfort-to-warmth ratio possible. After testing different types of patterns, we came up with the LOBSTER as the best one. Featuring less useless fabric and stitching than a classic design, the LOBSTER gloves are light and comfortable. Because most fingers stay together, you will feel much warmer than with traditional gloves. The separated thumb and index give a great grip and handling. This new design will have you happy to bring the gloves out when winter kicks in! - Magma Plus - Light & comfortable - Warm - Good Grip & Handling Magma Plus : Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast. Light & Comfortable : Because the glove doesn’t go around every single finger, we use less fabric, less stitching, and the overall design is less bulky. It results in a glove that doesn’t sacrifice comfort for warmth. Warm : Because most fingers stay together you will feel much warmer than with traditional gloves. Good Grip & Handling : Having separated the thumb and index, we made sure that this new shape doesn’t compromise grip/handling, as a mitten could. Don’t stress about your take-off or how you will handle the kite bar and the wing handles, it won’t be different from traditional gloves. We have also added a puller inside to pull these on easily. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted gloves in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA gloves stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MITU PRO FLEX
With the compact outline, the single concave remains the DNA of the MITU PRO models. Its unique shape helps the board start planing early, accelerate in an instant, and brings stability and predictability in all conditions. The shape has been improved this year with lateral flat sections on the bottom, as well as a flat section on the bottom between your front and back foot to give directional stability. The rocker line allows a better edge control and an overall improved feeling in all conditions. Its distinct swallow tail makes it very easy to initiate turns and carve with. Volume, stability, and float are perfectly balanced for a board which surfs better than ever before. It smooths out rough situations and makes you ride longer. The MITU PRO FLEX is constructed using the HD Foam Flex Composite technology, with optimized flex for maximum reliability, comfort, and maneuverability. The mechanical characteristics achieved provide a lighter weight and a perfect surfboard feel. Shock absorbers are placed under the pad to increase the board’s durability and provide extra comfort since they effectively absorb all impacts for the riders. This range features five sizes and goes from 5’2 all the way to 5’10. The larger sizes have a bit more emphasis on the planing abilities and general stability, while the smaller sizes focus more on maneuverability. All share the same shape features, with their specific outline to make the most of the wave’s energy. All sizes are equipped with a full pad and have deck inserts built-in so they can be equipped with foot straps. The 5’2 and 5’4 come with a set of F-ONE Flow Carbon XS fins. The 5’6, 5’8 and 5’10 come with a set of F-ONE Flow Carbon M fins.
TRAX HRD LT WITH UNIBOX 50MM - SLATE
The exclusive Helical Rail Design (HRD) plays a significant role in this board’s exceptional performances. It is a unique process that allows for the rails of the board to be shaped in 3D. There are three sections to the rail as it runs the length of the board. In the middle of the board, the rail is thin for grip and improved upwind ability. Under the feet, the rail is inverted and curved like a surfboard rail, allowing the board to smoothly track through chop and improving its carving ability. As the rail reaches the tips, it thins out again, bringing superior grip and bite to give excellent pop. On the water, the TRAX HRD LITE TECH offers a smooth, forgiving ride. The HRD rail eliminates spray and feels very comfortable regardless of the water conditions. The flex has been tuned to provide the optimum pop off the water, and the extra flex in the tips really helps to launch you into the air. When it comes to landings, the wide outline and channeled base combine to smooth things out and allow you to always retain control. The concave step design on the bottom, an association of a classic single concave with a full-length channel, gives the board its locked-in yet smooth ride, and allows you to go planing in an instant with strong upwind potential. The Lite Tech is exclusive to F-ONE. Patented by Rossignol Snowboards, it integrates a TPU element into the board allowing light to pass right through. It features two narrow, transparent lines down the center of the board, which is an outstanding aesthetic feature and will certainly help you stand out from the crowd. Combining efficiency, edge control and chop-friendly handling, the TRAX HRD LITE TECH is an excellent choice for beginners, experts, and everyone in between. From flat water to harsh chop, this board can handle it, and you’ll get a ride like no other with plenty of performance at your disposal. The TRAX HRD LITE TECH is available in four sizes: 135×39 cm, 136×40.5 cm, 137×42 cm, and 140×45 cm. All come equipped with four UNIBOX 50mm fins, which offer better speed and improved glide thanks to their thinner profile.
SEAFARER GROMS - FZ 3.2mm
We have made no compromises so our GROMS wetsuits use the same materials and technologies as the adults. It is important to us that our youngsters are comfortable to tackle the elements so they can grow their passion for our favorite sports. - Front Zip - X10D Jersey - GBS Seams DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable GBS Seams : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). In addition to being 100% waterproof, this type of stitching offers a high level of flexibility. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D Jersey / Stretch & Lightness These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
747 Wheels
Polyester 600D : Our bags are built in premium Polyester 600D, this is a choc, tearing, UV and water resistant material. It guarantees the best durability to our products. YKK zippers : We use heavy-duty 8mm YKK zippers built in a high-quality plastic. It avoids any crack, corrosion, and allow a fluid run every time you open/close the bag. Stiff layer : A rigid protective divider has been added in the middle of the bag to separate the foils from the boards. It ensures the foils do not damage the board, and vice versa. Thick foam : WHEELS versions are padded with a thick 8mm foam that guarantees the best protection.
POCKET CARBON CUSTOM
The F-ONE R&D team aimed to create a superior board that would remain as light as possible but with a bit more volume and thickness than its POCKET CARBON counterparts. Built using the innovative SLIM Tech Carbon Custom technology, the board is incredibly rigid and lightweight. The POCKET CARBON CUSTOM is perfect for any freeride sessions and will provide incredible performances and technicity to any experienced riders. The board is very responsive, easily controlled and will behave just as you want with the tiniest adjustments. The added volume also brings more buoyancy, which makes it an ideal board for freshwater sessions as well. The range includes three sizes: 110×44 cm, 120×46 cm and 130×47 cm. All sizes are equipped with a full deck pad. The 120 and 130 also have inserts for three footstraps. The 110 is our strapless-dedicated model and therefore has no inserts. All feature the Twin-Tracks system for maximum compatibility with any foils.
ALT Meteor - FZ 5,4,3mm
ALT stands for « Alternative ». We have built a greener alternative to conventional wetsuits, with performance in mind. It features a 100% natural YULEX rubber. Unlike finite resources like oil and limestone, natural rubber is a renewable resource. Directly tapped from FSC-certified hevea forests without cutting them down, it ensures a long-term supply stability as well as a drastically reduced environmental impact. Both inside and outside jerseys as well as our inside fleece are recycled, and the wetsuit features all our other standard sustainable processes. The performances of the ALT are close to a MAGMA’s. We believe the ALT represents a new generation of high-performance wetsuits that has a more reasonable impact on the planet. - Front Zip - Yulex Pure® - SD2 Tape 2.0 - Back knee emboss - Water strainer
MAST COVER
Built with a high density 3mm foam, these covers protect your favorite mast from impacts & scratches. They fit most of the models on the market. - Polyester 600D. - Sleeve Velcro Closure. - High density foam. Polyester 600D : Our bags are built in premium Polyester 600D, this is a choc, tearing, UV and water resistant material. It guarantees the best durability to our products. Sleeve Velcro Closure : Our Daybags now feature a Velcro closure located near the board’s tail. This folding sleeve Velcro closure is durable, convenient, and simple to care for. It’s easy to open or close the bag and provides strong security. High density foam : The Mast cover is built with a choc resistant high-density foam, which protects the foil effectively.
ALT Meteor - FZ 4,3mm
ALT stands for « Alternative ». We have built a greener alternative to conventional wetsuits, with performance in mind. It features a 100% natural YULEX rubber. Unlike finite resources like oil and limestone, natural rubber is a renewable resource. Directly tapped from FSC-certified hevea forests without cutting them down, it ensures a long-term supply stability as well as a drastically reduced environmental impact. Both inside and outside jerseys as well as our inside fleece are recycled, and the wetsuit features all our other standard sustainable processes. The performances of the ALT are close to a MAGMA’s. We believe the ALT represents a new generation of high-performance wetsuits that has a more reasonable impact on the planet. - Front Zip - Yulex Pure® - SD2 Tape 2.0 - Back knee emboss - Water strainer
MAGMA Baselayer Hooded 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - Magma hood - 2mm - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MEN X10D Hooded - FZ 4,3mm
Best of both worlds, the 4.3mm X10D allows unrestricted movements while keeping you warm during mid-season. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great comfort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
DIABLO V5
For the development of the DIABLO V.5, we spent a lot of time analyzing the current and potential future racing formats to determine what characteristics an Olympic race kite would require and how to get our riders to the top. As with all advancement, we looked hard at our previous kites, their strengths and weaknesses, and how we could use all our knowledge to move forward. Enter the next level of performance with the DIABLO V.5. We worked on a greater internal pressure, which means a very solid and stable kite dealing with high angles of attack and fast maneuvering. This kite offers maximum performance with the highest stability. Its new, simple, and clean technical design has reduced the weight of the DIABLO V.5 compared to the V.4. The high-performance construction also reduces material stretch. By removing the mesh over the vents, the V.5 inflates much faster and wingtips will pop out almost instantly. Our drainage system lets water and sand drain automatically. Using Technora bridles and a clever internal make up, we have reduced the total bridles keeping the same strength with less drag. This improves your angles and therefore your overall performances. We will constantly strive to improve the performance of our sail within the limits of what is allowed by the IKA for approved models (IKA: International Kiteboarding Association). That’s why we have a new bridle available on all production-models from January 2022 on, or on order. These V.3 bridles have again been enhanced and are truly targeted at elite competitors. They will bring a better upwind angle, more stability, more control when sheeting in, and offer the possibility for a high or low mode. Keeping up with the current racing landscape, the DIABLO V.5 works brilliantly on very short lines to give you the maximum performance. Using a new profile and arc, we have created a kite that can cope with any conditions so you can focus on racing. VMG, speed after maneuvers, fantastic angles, get ready to reach your best performances in every race.
X10D Baselayer Hooded 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - X10D hood - 2mm - X10D Jersey - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Triplex X10D The Triplex X10D is designed for flexibility. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together create a warm, durable and very flexible top. X10D Jersey : Beign in direct contact with the skin, the inside jersey is a key part of the top. Our X10D fabric not only provides maximum stretch and lightness, but also a smooth, silky feeling on the skin. S-foam : S-foam is a made from Limestone. It delivers the essentiels with a great flexibility - heat - durability ratio. Re-flex skin : Born from the latest technologies of stretch fabrics, the RE-FLEX SKIN is extremely flexible, durable and UV proof. It enhances your movements and makes them more explosive.
Car seat cover - Recycled
Our partnership with Circular Flow comes to fruition with our new, recycled CAR SEAT COVER. We have been collecting wetsuits and neoprene items at local shops to then turn them into new and useful neoprene products. In just our first season, we have collected 170kg of discarded neoprene items. These were sent to Circular Flow, a European factory that recycles old neoprene into new products, with minimal energy and chemicals. We are very proud to announce that the CAR SEAT COVER – Recycled is the first-ever product that will be manufactured in this factory, with our discarded wetsuits ! The outside jersey is 100% recycled. Inside neoprene is 100% recycled. Inside transparent coating is made from a natural latex emulsion. Protect your car and participate in the circular economy at the same time ! - 100% Recycled, comfortable neoprene - Protects your seat from water, salt, and all sort of smurges - No need of straps or elastics: The inside material is made to stick to the seat - Easy to set-up and remove
MIDLENGTH BOARDBAG 6'2 (192x67)
The Midlength comes with a different entry system; It is designed to be able to protect the board while the mast is attached. It features a high protective foam and we used velcros instead of zipper so the board doesn’t get damaged. Very handy when you have to assemble your foil on concrete and you need a protective mattress. - Polyester 600D - Sleeve Velcro Closure - Velcro Pocket - Mast access - Handle access - Silver polyTarp Polyester 600D : Our bags are built in premium Polyester 600D, this is a choc, tearing, UV and water resistant material. It guarantees the best durability to our products. Sleeve Velcro Closure : Our Daybags now feature a Velcro closure located near the board’s tail. This folding sleeve Velcro closure is durable, convenient, and simple to care for. It’s easy to open or close the bag and provides strong security. Velcro Pocket : This large outside pocket closing with a Velcro strap allows you to store all your board’s essentials, whether it’s wax, fins, or screws and nuts. Mast access : This specific design on all our foil bags allows you to put your board in its bag with the mast still on. Handle Access : This small slit allows easy access to the board’s handle so you can carry your board as you normally would when out of the bag. Silver PolyTarp : The outer layer is heat reflective, helping protect your board against UV rays, and water resistant. You can also use this side to lay down your board to protect it from different types of ground (roads, pebbles, sand).
WTF!? V2
The C-Shape itself has always been the best option for making an easy-to-control and dynamic kite, especially to maximize the handling during intense moments such as building up speed to go into popped unhooked tricks and kite loops. We utilized a five-strut design which keeps the profile exceedingly steady and gives our riders great confidence in the kite at all times. We decided to add a 5th line to help with control, optimize the power, and relaunch the kite quickly with minimal effort.The kite’s pop is huge and the slack which follows is sudden and gives enough time for the rider’s multiple passes. The WTF?! pulls you then out of your trick with speed and stability. Its profile has been improved to reduce the heavy sensation in your bar whilst keeping the excellent bar feedback from the previous edition. The kite moves better in the window and generates more speed in the low end. Each size of the WTF?! has been individually designed to match the conditions they are aimed at. The larger sizes have been developed to deliver more power and get you planing early. The smaller sizes are built with a high top end wind range in mind. This means whichever size you choose, you know everything has been done to get the most out of the given conditions on the day. We are offering the WTF?! in every size from 8m to 13m allowing you to choose the perfect quiver for you without having to compromise. The kites are also highly tunable, allowing you to dial in the flying characteristics to suit your riding style. There are three tuning options on the front lines; these allow you to adjust the kite to fly according to your level, riding style and the conditions of the day. Three rear line tuning options enable you to tune how the kite feels at the bar and adjust the handling too.
Kite knife
Safety knife to cut the lines when they accidentally go around you in case of a crash.
KITEFOIL 130 (130x50)
The Kite foil bag comes with a different entry system; It is designed to be able to protect the board while the mast is attached. It features a high protective foam and we used velcros instead of zipper so the board doesn’t get damaged. Very handy when you have to assemble your foil on concrete and you need a protective mattress. - Polyester 600D - Sleeve Velcro Closure - Velcro Pocket - Mast access Polyester 600D : Our bags are built in premium Polyester 600D, this is a choc, tearing, UV and water resistant material. It guarantees the best durability to our products. Sleeve Velcro Closure : Our Daybags now feature a Velcro closure located near the board’s tail. This folding sleeve Velcro closure is durable, convenient, and simple to care for. It’s easy to open or close the bag and provides strong security. Velcro Pocket : This large outside pocket closing with a Velcro strap allows you to store all your board’s essentials, whether it’s wax, fins, or screws and nuts. Mast access : This specific design on all our foil bags allows you to put your board in its bag with the mast still on.