MONOBLOC TAIL XXS 170 DW
Monobloc Tail DW XXXS 190 + Monobloc Tail DW XXS 210 The Monobloc Tails DW provide improved speed, greater stability and better forward projection, greatly enhancing the efficiency and fun of your downwinds, as you perform better with less fatigue. The monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, more stable, and faster. The monobloc also removes two screws: you’ll be on the water faster! The High Modulus Carbon fiber layup used for this Monobloc Tail leads to even more rigidity and dependability that will propel you to incredible performances in each session. Monobloc Tail DW XS 145 + Monobloc Tail DW XXS 170 Compared to the larger sizes in the DW range, the new XS 145cm² and XXS 170cm² feature longer fuselages. This provides pitch stability, which is a great advantage in strong wind conditions where the foil will cross bumps without jolting or over-power. The longer fuselage also offers better forward projection and more efficient pumping. Their reduced surface area contributes to greater speed, responsiveness, and maneuverability. This makes the foil more playful, allowing you to better connect bumps and have more fun carving. Monobloc Tail DW XS 135 + Monobloc Tail DW XXS 155 With a high aspect ratio (10.0), these new Monobloc Tails DW are optimized to provide a greater glide, a smoother take-off and improved low-end performance, while ensuring a stable, comfortable ride and excellent stability at speed. The longer fuselages provide pitch stability, which is a great advantage in strong wind conditions where the foil will cross bumps without jolting or over-power. It also offers better forward projection and more efficient pumping. Their reduced surface area contributes to greater speed and responsiveness. This makes the foil more playful, allowing you to better connect bumps and have more fun carving. The Ultra High Modulus (UHM) Carbon layup provides maximum stiffness for greater performance and incredible control thanks to instant feedback.
Bladder S1 - 9m² - BREEZE V5
Bladder S1 - 9m² - BREEZE V5
FW PHANTOM FCT 1480
The PHANTOM FCT foils offer great balance, accessibility, and versatility, perfect for a wide range of riders. They excel in every aspect, whether it’s providing smooth glide, easy planing starts, or effortless carves through waves.Thanks to a work on the lift distribution, aspect ratio and shape, these foils allow you to pump easily so you can start planing quickly. The take-off is super smooth and the acceleration progressive, allowing you to confidently improve from one session to the next. Whether you’re wing foiling, surf foiling, or enjoying downwinding, the PHANTOM FCT foils promise performance and fun.The PHANTOM FCT 1480 combines efficiency and accessibility. Its lift allows you to glide endlessly while having fun thanks to its incredible maneuverability and stability. It is an ultra-versatile foil that will allow you to surf in waves < 1m50, venture downwind, wing foil, or try yourself at wakefoiling… It does everything well, even in weak conditions.These foils are built with the Foil Compression Technology, a F-ONE innovation that offers impressive mechanical properties. Our FCT construction has been further improved and refined; these new PHANTOM FCT foils benefit from an additional carbon ply integrated into the construction, hence increasing their resistance and stiffness for even more control and stability.The fuselage can be directly connected to the F-ONE aluminum mast of the desired length. The setup and disassembly are also extremely easy, and the whole is very travel friendly.All in all, this tough and ding-resistant technology leads to one of the most accessible and scalable foil setups, all while keeping the DNA of what makes the PHANTOM foils so successful.
FW PHANTOM FCT 1680
The PHANTOM FCT foils offer great balance, accessibility, and versatility, perfect for a wide range of riders. They excel in every aspect, whether it’s providing smooth glide, easy planing starts, or effortless carves through waves.Thanks to a work on the lift distribution, aspect ratio and shape, these foils allow you to pump easily so you can start planing quickly. The take-off is super smooth and the acceleration progressive, allowing you to confidently improve from one session to the next. Whether you’re wing foiling, surf foiling, or enjoying downwinding, the PHANTOM FCT foils promise performance and fun.The PHANTOM FCT 1680 is ideal for low-wind conditions or riders of a larger stature. This front wing is large and stable, but that remains maneuverable and that will bring extra power and performance in light wind.These foils are built with the Foil Compression Technology, a F-ONE innovation that offers impressive mechanical properties. Our FCT construction has been further improved and refined; these new PHANTOM FCT foils benefit from an additional carbon ply integrated into the construction, hence increasing their resistance and stiffness for even more control and stability.The fuselage can be directly connected to the F-ONE aluminum mast of the desired length. The setup and disassembly are also extremely easy, and the whole is very travel friendly.All in all, this tough and ding-resistant technology leads to one of the most accessible and scalable foil setups, all while keeping the DNA of what makes the PHANTOM foils so successful.
4-PT FOIL MOUNT ADAPTER
The 4-point foil mount adapter is specifically designed to work with the ROCKET AIR’s 4-point system. This adapter lets you mount any top plate to the ROCKET AIR, and thus allows you to ride this board with any foil on the market. No screws are included with this adapter.
CARBON MAST 16 - 80 CM
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. It features both a new integrated top plate and TITAN mast foot at the bottom. This full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Available in 80cm and 85cm, this mast is perfect for all things foiling, and offering top-of-the-range performance in all conditions. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.
CARBON MAST 16 - 85 CM
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. It features both a new integrated top plate and TITAN mast foot at the bottom. This full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Available in 80cm and 85cm, this mast is perfect for all things foiling, and offering top-of-the-range performance in all conditions. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.
HM CARBON MAST 14 - 85 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
HM CARBON MAST 14 - 95 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
HM CARBON MAST 14 - 105 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
PLANE ESCAPE HM CARBON 430
Designed to foil at high speeds with full control no matter the conditions, these foils will lead to incredible performances, but their “raisons d’être” are first and foremost to provide the most exhilarating ride on the water. Such a high level of performance is only possible by using a Full Monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded together in a single piece made of pre-preg carbon. This consequently reduces the hydrodynamic drag and results in a stiff and solid foil. The newly added High Modulus Carbon fiber layup leads to even more rigidity and dependability that will drive you to incredible feats in each of your session. In light or strong winds and whether kite foiling or wing foiling, the ESCAPE HM CARBON is a playful, nimble, and enjoyable hydrofoil that delivers an amazing glide with a terrific speed potential and utmost control. The pro wing foilers will also appreciate its quality and sophistication as they push the limits of this discipline. The ESCAPE HM CARBON is available in three sizes: 630 cm², 530 cm² and 430 cm², our newest size. With an aspect ratio of 7.8, the 430 will let the experts experience thrilling speeds and tackle massive waves. It is also a great fit for riders of a smaller stature or to wing foil in strong winds. It is similar to the 530cm² in shape and outline, but has a thinner, less curved profile that allows it to go at high speeds without overpowering. The 430 sees a slight increase in its aspect ratio to stabilize it at high speeds and to increase its glide capabilities.
M8-16mm tapered head screws (A4 - T40 torx) x4
M8-16mm tapered head screws (A4 - T40 torx) x4
FW EAGLE HM CARBON 890
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping.Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions.Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast.The EAGLE is available in seven sizes, from 690 cm² to 1290 cm².The 690 cm² and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records.The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide.The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well.* Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.