FW IC6 950 V3
Made with our specific technology called Injected Carbon, our foils and stabilizers are very tough and durable. This technology makes our IC6 foils a lot more ding-resistant than conventional carbon wings. It has an aluminum insert at its core to provide extra resistance and better stiffness. The foil is bolted to the fuselage using two in-line and two offset screws, resulting in a geometry that ensures a very solid and rigid assembly.This foil is not only versatile but also very intuitive and predictable. The take-off is progressive and the ride in the air super smooth. You always have complete control of your speed and path and can make the most of your freeriding sessions.The front wing area is 950 cm² which is ideal for a wide range of use. With more lift, the IC6 V.3 is extremely easy to learn on, to improve fast, and to have fun no matter your skill level. Its elaborate design will enable you to ride at a very low speed or accelerate whenever needed while maintaining great maneuverability and a fantastic carving potential.The IC6 950 V.3 is designed for anyone looking to purchase a foil for the first time and progress with it, or simply to have a versatile setup able to bring high enjoyment on the water.The recommended fuselage and mast are made of aluminum. The mast plugs directly into the fuselage. The IC6 foil provides a stable and balanced setup and should be equipped with a 70 cm aluminum fuselage for kite foiling. An 80cm fuselage is also available for windfoiling.
ALU FUSELAGE 70
The F-ONE Alu Fuselage 70 provides an ultra-rigid wing connection. Built in aluminum, it is very strong and allows the suitable front wings and stabilizers to be connected effortlessly. • Super stiff wing connection• Solid aluminum construction• Slender and reinforced hydrodynamic section This fuselage connects directly to F-ONE aluminum masts. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. The aluminum profiles make the most of this homogeneous material to offer perfect rigidity, both in torsion and in bending. This fuselage is recommended for the IC6 650 V3 front wing. It is supplied with the necessary screws to connect the front wing (2x M6-25mm and 2x M6-15mm), the mast (2x M6-25mm) and the stabilizer (2x M6-15mm). You cannot use a carbon mast on this fuselage. WEIGHT: 0.18 kg
ROCKET WING ASC
Boasting a refreshed look, the ROCKET WING ASC remains your ideal and trusted partner for any sessions and throughout your wing foiling journey. This board provides stability from side to side, impressive responsiveness, and an easy and smooth transition into flight. The ROCKET WING ASC features a straight, optimized rocker line for an easy take-off and an intuitive ride. The sharp beveled rail profile and double concave hull shape will help you be up and flying in no time, and you won’t be unsettled when occasionally hitting the water or during touchdowns. Using state-of-the-art ASC technology, the boards benefit from one of the most advanced molding processes in the world, which also reduces waste and increases shape accuracy. The ROCKET WING ASC is as strong and durable as it gets; no matter how many dings, bumps or falls you suffer on the board, it will handle it. Offering a size range now going from 5’3 to 6’2, the generous volumes and widths of these boards make it possible for most riders to stand-up easily and to ensure that riding back to shore is possible, even if the wind drops. The ROCKET WING ASC is equipped with a recessed bottom handle for easy carrying, a full pad, rail savers, and the Twin-Tracks system to connect with most foils on the market. All sizes also now come with inserts for three footstraps.
LINX BAR 4 LINES 2025
The bar itself is small in diameter with a comfortable grip, which is forgiving on the hands. The grip has a rubbery feel with a fine texture. It feels firm underneath and a bit cushier on the top where your fingers wrap around the bar. The integrated floats at the bar ends house the mechanism to adjust the size of your bar. Simply pull down the tag under the bar, rotate the insert and your bar size is changed. You will also have the possibility to adjust your back lines length. The bar features a lifeline now placed into a new rectangular depower sheath for more durability. This new feature prevents the centerline from rubbing against the aluminum tube and will not rub against the user’s fingers. Above the bar, the stainless-steel cleat used to adjust the power has been updated for more simplicity, and the depower system is now thinner and therefore more precise. The LINX BAR offers the option to switch between a low and high V: High V for the BANDIT, BANDIT S, BULLIT, BREEZE V1 and TRUST Low V for the TRIGGER, BREEZE V2 & V3, ONE, and FURTIVE An additional float is placed above the depower system to maintain positive buoyancy if you become disconnected from your bar. The bar’s color-coding is very clear with orange on the left and dark blue on the right. The lines end in lark’s head loops and are being attached to the bridles’ connectors. The quick release features a built-in manual swivel above the push to untwist your lines. The new minimalist below the bar lifeline swivel is now made of a plastic stud and a stainless-steel ring on which you hang the leash. It rotates easily and automatically untwists your lifeline.
SEAFARER SHORTY HYBRID - FZ 3.2mm (long sleeves - short legs)
It’s very frustrating to be cold when riding in a warm place. That is why we designed our SEAFARER HYBRID to be warm. It is packed with the same technologies as the 3.2mm steamer: we basically just cut the legs. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, stretch, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-performance wetsuit at an affordable price, this is the right choice. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable
SEAFARER - BZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Back Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
TRAX HRD CARBON SERIES WITH UNIBOX 50MM - SLATE
The exclusive Helical Rail Design (HRD) plays a significant role in this board’s exceptional performances. It is a unique process that allows for the rails of the board to be shaped in 3D. There are three sections to the rail as it runs the length of the board. In the middle of the board, the rail is thin for grip and improved upwind ability. Under the feet, the rail is inverted and curved like a surfboard rail, allowing the board to smoothly track through chop and improving its carving ability. As the rail reaches the tips, it thins out again, bringing superior grip and bite to give excellent pop. On the water, this board offers an instant feeling of speed and performance. The HRD rail eliminates spray and feels very comfortable regardless of the water conditions. The TRAX HRD CARBON benefits from a biaxial carbon full layer which drops the weight of the board. It also gives it extra strength, a stiffer ride, and a more powerful flex response. Its lightness makes it very responsive and is an absolute dream once in the air. The board’s flex has been tuned with the properties of carbon fiber to provide the best pop off the water, and the tips are exceedingly responsive, thus helping you when you load up the edge for take-off. When it comes to landings, the wide outline and channeled base combine to smooth things out and allow you to always retain control. The concave step design on the bottom, an association of a classic single concave with a full-length channel, gives the board its locked-in yet smooth ride, and allows you to go planing in an instant with strong upwind potential. Combining edge control, early planing, upwind ability and chop-friendly handling, the TRAX CARBON is an excellent choice for beginners, experts, and everyone in between. The stiff ride and explosive pop make this board well suited to the more freestyle-oriented riders looking for bigger airs and longer sessions. From flat water to harsh chop, this precise board can handle it, and you’ll get a ride like no other with plenty of performance at your disposal and in full confidence. The TRAX HRD CARBON is available in four sizes: 135×39 cm, 136×40.5 cm, 137×42 cm, and 140×45 cm. All come equipped with four UNIBOX 50mm fins, which offer better speed and improved glide thanks to their thinner profile.
POCKET CARBON CUSTOM
The F-ONE R&D team aimed to create a superior board that would remain as light as possible but with a bit more volume and thickness than its POCKET CARBON counterparts. Built using the innovative SLIM Tech Carbon Custom technology, the board is incredibly rigid and lightweight. The POCKET CARBON CUSTOM is perfect for any freeride sessions and will provide incredible performances and technicity to any experienced riders. The board is very responsive, easily controlled and will behave just as you want with the tiniest adjustments. The added volume also brings more buoyancy, which makes it an ideal board for freshwater sessions as well. The range includes three sizes: 110×44 cm, 120×46 cm and 130×47 cm. All sizes are equipped with a full deck pad. The 120 and 130 also have inserts for three footstraps. The 110 is our strapless-dedicated model and therefore has no inserts. All feature the Twin-Tracks system for maximum compatibility with any foils.
MAGMA Baselayer Hooded 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - Magma hood - 2mm - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
X10D Baselayer Hooded 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - X10D hood - 2mm - X10D Jersey - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Triplex X10D The Triplex X10D is designed for flexibility. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together create a warm, durable and very flexible top. X10D Jersey : Beign in direct contact with the skin, the inside jersey is a key part of the top. Our X10D fabric not only provides maximum stretch and lightness, but also a smooth, silky feeling on the skin. S-foam : S-foam is a made from Limestone. It delivers the essentiels with a great flexibility - heat - durability ratio. Re-flex skin : Born from the latest technologies of stretch fabrics, the RE-FLEX SKIN is extremely flexible, durable and UV proof. It enhances your movements and makes them more explosive.
WING 5'0 (156x70)
The Wing bag comes with a different entry system; It is designed to be able to protect the board while the mast is attached. It features a high protective foam and we used velcros instead of zipper so the board doesn’t get damaged. Very handy when you have to assemble your foil on concrete and you need a protective mattress. - Polyester 600D - Sleeve Velcro Closure - Velcro Pocket - Mast access - Handle access Polyester 600D : Our bags are built in premium Polyester 600D, this is a choc, tearing, UV and water resistant material. It guarantees the best durability to our products. Sleeve Velcro Closure : Our Daybags now feature a Velcro closure located near the board’s tail. This folding sleeve Velcro closure is durable, convenient, and simple to care for. It’s easy to open or close the bag and provides strong security. Velcro Pocket : This large outside pocket closing with a Velcro strap allows you to store all your board’s essentials, whether it’s wax, fins, or screws and nuts. Mast access : This specific design on all our foil bags allows you to put your board in its bag with the mast still on. Handle Access : This small slit allows easy access to the board’s handle so you can carry your board as you normally would when out of the bag. Silver PolyTarp : The outer layer is heat reflective, helping protect your board against UV rays, and water resistant. You can also use this side to lay down your board to protect it from different types of ground (roads, pebbles, sand).
THRUSTER SET F-ONE FLOW XS - PAPAYA
RTM Technology stands for Resin Transfer Molding. This process uses a closed mold to produce accurate composite parts. The resin is injected in the mold after it is closed, with the dry fiber having been placed inside beforehand. The closed mold injection allows for great shape accuracy. In addition, the epoxy resin used makes the fins or stabs stronger and more responsive, thus providing a sharper feel on the water.
THRUSTER SET F-ONE FLOW M - PAPAYA
RTM Technology stands for Resin Transfer Molding. This process uses a closed mold to produce accurate composite parts. The resin is injected in the mold after it is closed, with the dry fiber having been placed inside beforehand. The closed mold injection allows for great shape accuracy. In addition, the epoxy resin used makes the fins or stabs stronger and more responsive, thus providing a sharper feel on the water.
PRO RACE CARBON (Tuttle + Twin tracks)
Designed with and for our best riders, this board is built to withstand the demands and pressure of racing. It is the fastest board we have designed to date and can be pushed to the limit. The HD Foam construction gives the PRO RACE CARBON an incredible resistance, all while maintaining a light weight. The board’s build has been reinforced for even more solidity, and the peel-ply finish on the deck provides grip with no extra weight. It is available in 4’7 size either only with a deep carbon Tuttle box, or with both the deep carbon Tuttle box and the Twin-Tracks system for optimal compatibility with any foil. Both versions are equipped with inserts for three footstraps.
ROCKET SUP DW PRO CARBON COMP.
The ROCKET SUP DW PRO CARBON COMP is made to paddle fast and to take-off even faster, while still benefiting from superb stability. This board is also designed to catch fast swells while using smaller foils that require a slightly higher take-off speed. With a narrower width and a slimmer outline, especially in the nose and tail, this board delivers a super smooth glide, crisp acceleration, great directional stability, and more responsiveness in flight; all leading to an effortless, high-performance downwind session. The ROCKET SUP DW PRO CARBON COMP also benefits from a small step on the hull closer to the tail, on top of the one already present in front of the twin tracks as on our SUP DW PRO range. These two steps effectively reduce drag during take-off accelerations and touchdowns. The second step, in conjunction with a higher kicktail to minimize tail-water contact during pumping, creates a clean break to channel the water flow at the back without generating excessive drag when in motion. This board benefits from a HD Foam Carbon Composite construction. This light and stiff construction increases the board’s maneuverability and results in an even more direct feel of the foil. Control is absolute throughout the entire downwind, even at high speeds. Longer and narrower than any other board in our range, the ROCKET SUP DW PRO CARBON COMP is perfect for SUP foiling races, and for daring riders looking to go the extra mile on long open ocean crossings or in big, rolling swells.
