Neturime
,

PACK ALU MAST 80 CM TITAN

€370.00
Daugiau
Add to wishlist
,

MAGMA Boots 7mm - Round toe

€110.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
, ,

BIG AIR TT HANDLE

€105.00
Į krepšelį
Add to wishlist
,

STRIKE 6

Price range: €989.00 through €1,419.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

REACT VEST

The REACT Vest is MANERA's new impact vest, designed specifically for kiteboarding. Inspired by the VAGABOND and its minimalist design, it focuses on the essentials: once your kite is in the air, nothing should distract you. With its thin 15 mm foam layer, the REACT offers a perfect balance between protection and freedom of movement. Strategic padding effectively protects the torso and back, while leaving room for a harness. The lower part of the jacket is unpadded and unobstructed for the perfect harness fit and optimum comfort, even during long sessions. Two small pockets on the collarbone area keep your kite knife close at hand. Kite harness zone : this impact vest has been designed for kitesurfing and features a special area without foam panels to allow the harness to fit without discomfort. Kite knife : two small pockets on the collarbone area keep your kite knife close at hand. Attachment points : numerous attachment points for all your accessories Cut-resistant jersey : we have chosen a specific cut-resistant jersey to avoid any bad injuries due to a kite line, a foil, or anything sharp that you could encounter.

€165.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

X10D Hooded - FZ 5,4,3mm

Price range: €0.00 through €460.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

CLASSIC - FZ 4,3mm

Price range: €0.00 through €250.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

CLASSIC - FZ 5,4,3mm

Price range: €0.00 through €265.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

CLASSIC - FZ 3,2mm

Price range: €0.00 through €240.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

Beanie

Keep your head warm with our MANERA beanies. Made in 50% recycled polyester and 50% acrylic.

€18.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

SEAFARER+ Women - FZ 5.3mm

€400.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

SOCKS - Stay salty

€12.00
Daugiau
Add to wishlist
,

MAGMA Women Meteor Hooded - FZ 5,4,3mm

DESIGNED IN 3D: While the industry standard is to develop 2D models and try to fit them on a 3D body, we decided to innovate and take the opposite direction. We use computer design to create well-fitting wetsuits in 3D, then employ innovative software that converts them into an accurate 2D model for the factory. It creates a natural, second-skin fit that sets MANERA wetsuits apart. A GOOD FIT MEANS EVERYTHING Warmth: No water entry, no air pockets. Durability: The neoprene only stretches when moving. Comfort: No tight areas, comfortable underarms/crotches. Style: Wrinkles will never go out of style.

€620.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

X10D Boots 3mm

X10D Jersey - The X10D inside layer is the most flexible material you can find on a suit, it makes you feel stretch and light, with a good feeling on the skin. DESIGNED IN 3D - When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. Producer use computer design to model good-fitted hood in 3D, then Manera employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. Donut cuff - Boots are closed by a donut cuff which prevents any water from coming in and fill up the boot. Sealing prints - The sealing print around the shin brings a better grip between the wetsuit and the boot. Coupled with the wetsuit SEALING PRINT, it prevents the wetsuit’s leg from rolling up. Split toe - X10D boots feature a split toe. It offers a great foot support and a more natural movement. Foot support - Foot support is essential to get a comfortable and performing neoprene boot. MANERA boots feature ''SIDEWALLS'' on each side of the foot to maintain it. Producer also use a stiffer neoprene around the front of the foot in order to hold the boot structure. Without these features the foot would be able to slide or the boot would deform, which would lead the user to lose his balance, lack precision or even get hurt. Direct drive - Manera soles are super thin in order to keep a direct and precise contact between the foot and the board. The micro-spikes on the sole provide a perfect grip on wax or on a pad.

€0.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

WOMEN SEAFARER - FZ 3.2mm

Designed in 3D: While the industry standard is to develop a 2D pattern to try to fit a 3D body, we decided to innovate and change our approach. We use design software to model well-fitting wetsuits in 3D, then employ innovative software that converts them into an accurate 2D pattern for our factory. MANERA wetsuits stand out thanks to their natural fit, adjusted like a second skin. Warmth: No water ingress, no air pockets. Durability: The neoprene only stretches during movement. Comfort: No tight areas, no discomfort in the armpits or crotch. Style: Pleats will never go out of style. Sealing prints: Sealing prints prevent water from entering the ankles and wrists, and they also hold the forearm and calf panels in place. They are flexible enough not to interfere with donning and doffing. Strategic structure: Certain areas of the wetsuit are particularly sensitive to friction, tension, and tearing. This is why we designed MANERA wetsuits to: Avoid any seams in high-stress areas, which increases flexibility and durability. Ensure that the seams are stressed vertically and not horizontally. Remove all seams from areas of friction, which prevents irritation and improves flexibility. Strategically reinforce areas and panels. Fusion cut: The different layers of neoprene are fused together in the arms and legs, creating a finer and more aesthetically pleasing finish. By encasing it, it also protects the inner neoprene foam (AIR-FOAM). GBS Seams: The various neoprene panels are glued and then blind-stitched (the needle does not pass entirely through the neoprene). In addition to being completely waterproof, this type of seam offers a very good level of flexibility. Triplex SEAFARER: The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / S-foam protection / X10D+ insulation / Warmth and flexibility. The combination of these three materials provides the essentials of a good wetsuit: warmth, flexibility, and comfort.

€315.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

ROCKET FREE SURF

With the rise of new disciplines like K-Winging and pocket winging, which offer the freedom to ride with minimal bulk, some riders will naturally shift their focus toward ocean surfing, carving swells or bumps with style and precision. This board is built for exactly that: delivering the take-off support and stability you need, while being 100% dedicated to carving once you’re in the air. In this spirit, the ROCKET FREE SURF builds on everything that made the ROCKET SURF PRONE a success: an elongated outline that facilitates take-offs, optimized volume distribution, and a carefully tuned rake angle that creates perfect front-to-back foot pressure. Combined with reduced thickness, this provides excellent in-flight control. The straight rocker line ensures smooth acceleration, while the beveled rails reduce drag on touchdowns and enable more aggressive, committed turns. A slightly flatter nose improves both control and pumping efficiency, while the tapered nose and tail enhance maneuverability and help avoid unwanted contact with the water during carves. The rear step and kicktail free up water flow and boost pumping amplitude. Finally, the deck has been widened and reshaped slightly to improve foot placement and overall stability. Compared to the FREE DOWNWIND, the FREE SURF is a nimbler board thanks to its tapered nose and bottom outline, reduced thickness, and balanced foot pressure. This combination offers excellent pitch stability, even during the most powerful turns. Built with our Bamboo Deck Construction, the board stays light and responsive, while maintaining durability and strength. The feeling of the foil is very direct, and control is absolute throughout the entire session, even at high speeds. Available from 5’2 to 6’11 (47L to 91L), the ROCKET FREE SURF will delight riders looking for a playful, maneuverable board with easy take-off and excellent glide to carve turn after turn, in any condition.

Price range: €1,349.00 through €1,649.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

THRUSTER SET F-ONE FLOW XS - PAPAYA

RTM Technology stands for Resin Transfer Molding. This process uses a closed mold to produce accurate composite parts. The resin is injected in the mold after it is closed, with the dry fiber having been placed inside beforehand. The closed mold injection allows for great shape accuracy. In addition, the epoxy resin used makes the fins or stabs stronger and more responsive, thus providing a sharper feel on the water.

€110.00
Daugiau
Add to wishlist
Neturime
,

THRUSTER SET F-ONE FLOW M - PAPAYA

RTM Technology stands for Resin Transfer Molding. This process uses a closed mold to produce accurate composite parts. The resin is injected in the mold after it is closed, with the dry fiber having been placed inside beforehand. The closed mold injection allows for great shape accuracy. In addition, the epoxy resin used makes the fins or stabs stronger and more responsive, thus providing a sharper feel on the water.

€110.00
Daugiau
Add to wishlist
,

ROCKET FREE SURF CARBON

With the rise of new disciplines like K-Winging and pocket winging, which offer the freedom to ride with minimal bulk, some riders will naturally shift their focus toward ocean surfing, carving swells or bumps with style and precision. This board is built for exactly that: delivering the take-off support and stability you need, while being 100% dedicated to carving once you’re in the air. In this spirit, the ROCKET FREE SURF builds on everything that made the ROCKET SURF PRONE a success: an elongated outline that facilitates take-offs, optimized volume distribution, and a carefully tuned rake angle that creates perfect front-to-back foot pressure. Combined with reduced thickness, this provides excellent in-flight control. The straight rocker line ensures smooth acceleration, while the beveled rails reduce drag on touchdowns and enable more aggressive, committed turns. A slightly flatter nose improves both control and pumping efficiency, while the tapered nose and tail enhance maneuverability and help avoid unwanted contact with the water during carves. The rear step and kicktail free up water flow and boost pumping amplitude. Finally, the deck has been widened and reshaped slightly to improve foot placement and overall stability. Compared to the FREE DOWNWIND, the FREE SURF is a nimbler board thanks to its tapered nose and bottom outline, reduced thickness, and balanced foot pressure. This combination offers excellent pitch stability, even during the most powerful turns. This board is available in HD Foam Carbon Composite, a very light and stiff construction that enhances maneuverability and delivers an even more direct foil feel. More reactive when pumping, the carbon version does nonetheless share the same shape and program as the bamboo. Available from 5’2 to 6’11 (47L to 91L), the ROCKET FREE SURF CARBON will delight riders looking for a playful, maneuverable board with easy take-off and excellent glide to carve turn after turn, in any condition.

Price range: €1,989.00 through €2,189.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
,

ROCKET FREE DOWNWIND

The ROCKET FREE range was developed to meet the needs of emerging disciplines focused on freefly and downwind. In these sports, freedom is key: the wing or paddle is only used to take off before being put aside, stashed or flagged out to ride swells and ocean energy alone. This calls for boards with more length to improve glide and acceleration, along with enough volume to start planing quickly and with stability. Since take-offs in these disciplines are indeed more challenging than in wing foiling, these boards give you the edge you need to get going smoothly. In this spirit, the ROCKET FREE DOWNWIND builds on the fundamentals of the MIDLENGTH board: natural front/rear balance, stability, and glide, while pushing further. Its longer shape and stretched outline increase glide even more. A rear step and kicktail help build speed quickly and make touchdowns smoother. The shallow cockpit keeps control underfoot without adding excess thickness, and the width-to-thickness ratio strikes the perfect balance between stability and acceleration, even when underpowered. Compared to the FREE SURF, the FREE DOWNWIND is a more stable board, featuring increased thickness, a wider nose and bottom surface, and squarer rails. The foot pressure is slightly front-biased, following the feel of classic F-ONE boards. It’s designed for riders who prioritize stability and easy take-offs, even in challenging or choppy conditions. Built with our Bamboo Deck Construction, the board stays light and responsive, while maintaining durability and strength. The feeling of the foil is very direct, and control is absolute throughout the entire session, even at high speeds. From 6’4” to 7’8” (85 to 124L), the ROCKET FREE DOWNWIND is accessible, versatile, and made for performance whether you're chasing offshore bumps or looking for easy planing in any condition.

Price range: €1,749.00 through €1,969.00
Pasirinkti savybesThis product has multiple variants. The options may be chosen on the product page
Add to wishlist
Neturime
,

MAST TOP DKF

€179.00
Daugiau
Add to wishlist
Neturime
,

STAB C250 FENCE

€235.00
Daugiau
Add to wishlist
Neturime
,

PRO RACE CARBON (Tuttle + Twin tracks)

Designed with and for our best riders, this board is built to withstand the demands and pressure of racing. It is the fastest board we have designed to date and can be pushed to the limit. The HD Foam construction gives the PRO RACE CARBON an incredible resistance, all while maintaining a light weight. The board’s build has been reinforced for even more solidity, and the peel-ply finish on the deck provides grip with no extra weight. It is available in 4’7 size either only with a deep carbon Tuttle box, or with both the deep carbon Tuttle box and the Twin-Tracks system for optimal compatibility with any foil. Both versions are equipped with inserts for three footstraps.

€1,669.00
Daugiau
Add to wishlist
Neturime
,

MONOBLOC TAIL XXXS 160 CARVING

€340.00
Daugiau
Add to wishlist