ROCKET SUP DW COMP. CARBON
The ROCKET SUP DW COMP is made to paddle fast and to take-off even faster, while still benefiting from superb stability. This board is also designed to catch fast swells while using smaller foils that require a slightly higher take-off speed. With a narrow width and a slim outline, especially in the nose and tail, this board delivers a super smooth glide, crisp acceleration, great directional stability, and more responsiveness in flight; all leading to an effortless, high-performance downwind session. The ROCKET SUP DW COMP also benefits from a small step on the hull closer to the tail, on top of the one already present in front of the twin tracks. These two steps effectively reduce drag during take-off accelerations and touchdowns. The second step, in conjunction with a higher kicktail to minimize tail-water contact during pumping, creates a clean break to channel the water flow at the back without generating excessive drag when in motion. The ROCKET SUP DW PRO is ideal for short to medium period bumps (think Mediterranean), while the ROCKET SUP DW COMP will take-off better in longer period swells (think Oahu) that are faster and require a longer and even narrower board. This board benefits from a HD Foam Carbon Composite construction. This light and stiff construction increases the board’s maneuverability and results in an even more direct feel of the foil. Control is absolute throughout the entire downwind, even at high speeds. Longer and narrower than any other board in our range, the ROCKET SUP DW COMP is perfect for SUP foiling races, and for daring riders looking to go the extra mile on long open ocean crossings or in big, rolling swells. * Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
TRIGGER V2 BY BRAINCHILD
With its five-strut, high aspect ratio design and outstanding light weight, the TRIGGER by Brainchild is super responsive and efficient, while featuring a very intuitive and direct handling. With its light steering pressure, this kite is a joy to fly, and it remains incredibly easy to always know where it stands with closed eyes. The fixed bridle system keeps the shape stable in the air in the entire wind range.The TRIGGER also stands out for its ability to send controlled loops with the right amount of boost. It catches you perfectly after every trick, and makes looping safe and easy for everyone, while allowing pros to perform double loops with ease.The TRIGGER by Brainchild features a new and exclusive panel layout concept, where the panels on the wingtip areas are all joint together into one panel, as well as the main panel between the tip and the S2 strut. This new panel design enhances the aerodynamic behavior of the kite, as well as reduces the amount of seams, therefore decreasing the weight even further.An exciting new opportunity is here with the advent of a new kite manufacturing facility in Northern Macedonia in Southeastern Europe, headed by Ralf Grösel. The production facility, named Brainchild, is distinguished by its adoption of state-of-the-art assembly technologies and an unprecedented commitment to sustainability, offering an environmental record unmatched in the kiteboarding world.Brainchild uses new, state-of-the-art, extra-light materials as well as innovative techniques like PROWELD – where all the segments of the leading edge are welded together rather than stitched, which leads to an overall increased stiffness of the kite and even further weight reduction. Moreover, the kites are now digitally printed instead of using typical screen-printing processes. The freedom offered by this printing process allows us to explore new and unique graphics and colors.
TRIGGER V2 TEC
The TRIGGER perfectly embodies this philosophy, positioning itself as both a podium and an accessible kite, promising to become a bestseller and be talked about this autumn. With its five-strut, high aspect ratio design and light weight, the TRIGGER is super responsive and efficient, while featuring a very intuitive and direct handling. With its light steering pressure, this kite is a joy to fly, and it remains incredibly easy to always know where it stands with closed eyes. The TRIGGER also stands out for its ability to send controlled loops with the right amount of boost. It catches you perfectly after every trick, and makes looping safe and easy for everyone, while allowing pros to perform double loops with ease.
LINX BAR 4 LINES 2025 - SK99
The new SK99 lines offer increased durability and greater resistance to abrasion and elongation. Thanks to these new lines, the performances and connection with the kite are greatly enhanced, and the bar feedback is more direct and precise. The new removable pigtail system allows for easier line extensions addition, and for improved repairability. The LINX BAR is our control system, a dual adjustable length bar that comes in two sizes (38/45cm and 45/52cm). It perfectly blends lower weight and simplicity with excellent comfort and function.
MAGMA Women Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
SEAFARER HYBRID - FZ 2,2mm (short sleeves - long legs)
The new SEAFARER SHORTY 2.2mm provides excellent freedom of movement while maintaining essential core warmth. It is packed with the same technologies as the HYBRID 2.2mm but features cropped sleeves and legs. Stretchy, comfortable, and robust, it is perfect for summer sessions in warmer waters. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, stretch, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-performance wetsuit at an affordable price, this is the right choice. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable
SEAFARER Women - FZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER Women - BZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Back Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
Bobby 5 panels
Our BOBBYs are no ordinary bobs. Built in the same fabric as our technical boardshorts, our BOBBY hats are made to be light, to dry fast and to resist against UV rays and saltwater. This 5-panel version features mesh panels on both sides to improve airflow and prevent overheating during the warm summer days. Its fit is also conceived for action: fitting closer to the head, the BOBBY 5-PANEL version will hold better in strong wind and waves than our standard BOBBY. It is meant to spend the day out there: Before, during and after your sessions.
SOCKS - X10D
At MANERA, we aim to keep you warm, all the way down to your feet! Discover our take on socks, with the thin and more flexible XTEND model. Made of 85% recycled materials, the XTEND socks offer stretch, comfort and hold perfectly. These socks are perfect for your everyday life, whether it’s going for a workout on a calmer day or winding down with your mates after a great session. Carry the “Stay Salty” vibe one step at a time!
SOCKS - Magma
At MANERA, we aim to keep you warm, all the way down to your feet! Discover our take on socks, with the warm, thick MAGMA model. Made of 85% recycled materials, the MAGMA socks offer stretch, comfort, and hold perfectly. These socks are perfect for your everyday life, whether it’s going for a workout on a calmer day or winding down with your mates after a great session on the water. Carry the “Stay Salty” vibe one step at a time!
HARD WING HANDLE
SIZES (cm) WEIGHT (kg) HARD HANDLE 28 28 0,29 HARD HANDLE 30 30 0,30 HARD HANDLE 37 37 0,32
HALO harness V2
The HALO 2.0 continues to offer our breakthrough "Adaptive Shell" technology, all in a harness you can trust. Following the recall concerning these parts, the “Adaptive skin”, “Pivot Inter” and “Pivot Exter” have been redesigned to provide a much higher resistance without compromising comfort. With your safety as our priority, thorough testing has been conducted at the factory, in the water, and inside our office’s lab, under the same protocol as for the Quick-Release ISO norm. In Halo 2.0 you'll find the two basic principles of our Halo range: The Softshell The softshell provides perfect adaptability to the user's body type and movements. But it becomes distorted under the pressure of the kite: The user's sides are compressed. It therefore has good adaptability, but little hold. The Hardshell The hardshell does not become distorted under the pressure of the kite: The user's sides are not compressed. But it has no adaptability to the user's body type and movements. It therefore has a very good hold, but little adaptability. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. - Adaptive skin - Hardshell - Softshell - Arc spreaderbar Adaptive shell : Our Research and Development approach is to create the best possible product, so we have sought to use the advantages of the two current technologies while eliminating their faults. This is how the “Adaptive Shell” was born. This patented technology is made up of two main parts: The Adaptive skin and the Hardshell. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. Adaptive skin : The Adaptive skin is a support skin made of a flexible material providing the user maximum adaptability and freedom of movement. It is directly in contact with the body; its function is to provide comfort. Hardshell : The Hardshell is a rigid arc; it prevents the harness from bending and thus compressing the user's body under the strong pressure of the kite. It is not in contact with the user nor with the back of the Adaptive skin; its function is to manage the mechanical pressure that the harness receives. Durability : A product is as durable as the least durable part of its components. The different components of a harness are often non-replaceable (sewn straps, glued foams, etc.) and certainly not recyclable. Therefore, sometimes a worn or damaged part forces you to throw away the entire product. In an effort to reduce our carbon footprint and in order to provide better customer service, all HALO components are assembled without glue or seams so that each part is easily replaceable. We stock spare parts and are able to replace each of them. The ARC spreaderbar, the sliding rope, and the kitenife are included with purchase. Direct contact : Thanks to our Adaptive shell technology, and in particular the very adaptable Skin part, there is no longer a need to use large, thick foam for comfort. The HALO's ultra-thin neoprene foam provides several advantages over a conventional harness: . A more direct feeling . Less bulky contact . Lighter, even when in the water Fitting : In order to optimize the customer experience, we have added two sizes: S+ and M+. These two new sizes are in fact the standard S and M harnesses equipped with longer spreaderbars. Why? Bodies may assume different shapes: . A more rounded shape (someone with a big belly) . A more oval shape (someone with wide hips). For the same waist size, we therefore have two completely different body types. By incorporating longer spreaderbars, sizes S+ and M+ are more suitable for people with wider hips. Leash attachement : Our kite leash attachment point is located towards the front of the harness, allowing easy and direct access for release in case of an emergency. Attached to the straps on the right-hand side by default, the metal ring can easily be moved to the left straps. W A R N I N G : NAISH leashes are not adapted to the size of our metal ring, and it could present a safety hazard during release. We are currently working on a new version of the ring. Arc spreaderbar : The ARC is a new generation spreaderbar developed to offer a more precise, comfortable navigation experience, with a harness that is better held in place.
ESKIMO PONCHO
We have fused our BLIZZARD with our high-quality ponchos in order to offer the ultimate winter accessory. The outside features a waterproof, windproof and light shell that protects you from the elements, while the inside towel provides extra warmth and keeps you dry. Whether you want to stay on the beach waiting for the conditions, or just use it as a poncho to change, the STORMY will be your best winter partner. The shell is 100% recycled. - Water / Wind repellent - Inner soft towel - Warm hand pockets - Big pockets - Nylon zipper
Cap
Originally only made for sun protection, the caps became more of a fashion accessory over the time. Check-out our range made of multiple trendy colors and materials and make a choice !
Foil leash - Lite
The FOIL LEASH – LITE is a lighter, more compact version of the FOIL LEASH. This FOIL LEASH goes unnoticed while riding. This technology allowed us to use a reduced diameter, and a shorter length leash, which won’t drag in the water or get tangled inside your foil. The specific bungee softness has been designed to make sure the board doesn’t slingshot back to you during a wipeout. - Rail saver - Dyneema - Rigid part
Offshore vest
The OFFSHORE is made for those who spend their day out there. It allows you to carry water, a tool, your phone, a snack, safety equipment and much more thanks to its practical and accessible pockets. Its fit is inspired by trail running vests, hence maintaining a great freedom of movement and mobility of the upper body once at sea. The OFFSHORE takes up as little space as possible on the water, while still being able to carry a maximum number of accessories, including a wing! Indeed, thanks to its two external straps, it allows you to deflate in total comfort. Once you've reached your starting point, sit on your board, fold the wing, open the two straps, and compress the wing outside the bag. What's more, the often-flashy colors of the wings make you even more visible from afar. We advise you to use the WING PADDLE ATTACHMENTS we've developed, so that you can secure your paddle along the central strut of your wing. The OFFSHORE bag has paddle attachments, but having the paddle in the wing is much more comfortable. A word about “deflating”: SUP foil downwind is becoming increasingly popular, but the logistics of a downwinder are complicated. Riding upwind with a wing, deflating, and then paddling out is much more practical: no car, possibility of choosing the length of your DW, etc. MANERA has therefore decided to create a light, practical vest adapted to this sport: the OFFSHORE. Note related to SUP foil downwinding: There are handy, mini hand pumps that can re-inflate a wing in just a few minutes, up to 6-7 PSI. These pumps can be a safety feature in case of difficulty (e.g. inability to take-off). They fit in the OFFSHORE's pocket, and we've designed a nozzle to adapt these pumps to F-ONE wings’ valves. Download the file HERE and have the part printed by your local 3D printer. *Disclaimer: Downwinding require physical preparation, proper security devices, and assistance at sea. Please do not attempt any downwinders alone or without proper training. - Backpack - Hydratation bag - Integrated flashlight - Whistle buckle - Front pockets - Deflator straps - Paddle attachments Deflator straps : Deflating has never been so easy! Thanks to its two external straps, the Offshore vest allows you to deflate in total comfort: fold the wing, open the two straps, and compress the wing outside the bag. Integrated flashlight : Inspired by trail running vests, using light and resistant materials, the OFFSHORE is made to be forgotten. Backpack - Hydratation bag The outside pocket has a compartment for a hydration pack and a large pocket ready for your belongings. (The hydratation bag is not included with the offshore.) Low profile, lightweight, fitted : Inspired by trail running vests, using light and resistant materials, the OFFSHORE is made to be forgotten. Whistle buckle : The chest release buckle features an integrated safety whistle, which may come in handy if you ever need to be heard or call for help at sea. Front pockets : Keep your phone and VHF radio close at hand, on your chest. Paddle attachment : We recommend attaching the paddle along the central strut of the wing, but it's perfectly possible to have it on your back as in a "quiver" thanks to the two straps. Leash attachments : The vest features a multitude of leash attachments to secure caps, bucket hats, glasses, phones and other accessories. Hand pump connector : The hand pump connector is a tip/connector used to connect the valve of your wing with a standard balloon pump. This allows you to carry a compact pump in a bag, which you can use if you need to re-inflate your Wing, during a downwind.*The Connector is not included in the OFFSHORE vest. For commercial reasons, we did not produce this connector. But we still wanted everyone to be able to access the design and have it 3D-printed at home, so you'll find a link below to download the ready-to-print design.
MAGMA Hood 2mm
The MAGMA hood features a double flap: One stays outside the wetsuit collar while the other one comes inside. It creates a double barrier against water flushing and it makes sure the hood stays in place. We have used our Reflex-skin jersey to line the areas where we need mobility: Neck, face, chin. Head and ears are built in Glide-skin neoprene which is waterproof & windproof to fight the wind-chill effect. The inside is lined with our MAGMA PLUS for an unbeatable warmth and fast-drying. It’s the weapon of choice if you want to spend the winter without brain-freeze while still having a good mobility. Update: From the FW24 collection onward, all our hoods have been updated to have a bigger face opening. It provides more comfort and makes sure you can wear the hood under the chin without being too squeezed. - Magma Plus - Designed in 3D - Update Magma Plus : Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
Fleece
Built in 100% recycled sherpa polyester, the MANERA fleece provides warmth and comfort before and after your sessions. This new fleece features a front full-length zipper, side pockets and a chest zippered pocket for convenient storage. Composition : Fleece : 100% recycled polyester Chest pocket : 94% recycled polyester & 6% elastane.
Watercap
Built to protect you both inside and outside of the water, the WATERCAP is made of a super light and waterproof boardshort material. Its fit has been specifically developed to feel comfortable and stay on your head even in the strongest winds or duckdives. That’s the cap you’ll be wearing all day long, whether you’re chilling on the beach or having fun in the water. - Light, waterproof, breathable - Fitted for ride Light, waterproof, breathable : Developed to be used when riding, the WATERCAP uses a light and waterproof fabric. It doesn’t soak water in and dries really fast so you can still wear it after your session. The side mesh allows air to flow and prevents overheating, a key feature for these hot summer days. That cap is made to withstand UV rays, saltwater, strong wind, and waves – so please, put it on out there! Fitted for ride : The WATERCAP is not like every other cap. We have studied the fit to be comfortable while holding well even in the worst conditions. Don’t hesitate to go full speed when kiting or winging, or to duckdive while surfing, the WATERCAP will stay on. To prevent it from flying off, you will find different leashes attachments on the back of the cap. The leash can be attached to your wetsuit zipper to make sure you won’t lose your favorite cap.
MAGMA Hooded - FZ 6,4mm
The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
TARGET
The TARGET is a mid-aspect ratio kite, bringing incredible stability, power, lift and user-friendliness. The aspect ratio has been tuned perfectly for each size, and on the smaller ones, the chosen aspect ratio brings a super dynamic and powerful feeling. This kite is very direct to steer and reacts instantly on the lightest bar impulse. It delivers confidence-inspiring and intuitive handling, so you will always know where it sits. It will effortlessly go anywhere you want it to at any time and position itself perfectly for any maneuver. The TARGET is the true definition of power on demand, bringing you the power, lift or boost you need in the exact moment you want it. With its huge power potential within the bar throw, you can easily control your riding speed. Sheet in and get infinite power as the kite accelerates as fast as your foil goes with a very comfortable pull. Sheet out and it immediately loses any traction so you can cruise around effortlessly. The wingtips are perfectly stable, allowing tight turns right at your fingertips. The profile and weight distribution of this kite were carefully designed to deliver the best drift stability possible. No matter how far it travels in the window, it will always float back without collapsing. With this profile offering plenty of stability even in gusty and turbulent conditions, you can trust the TARGET with eyes closed. After each gust, it will easily return back to 12. You will also enjoy a reduced lateral pull for a more comfortable ride. The TARGET offers easy upwind abilities, control in gusty conditions, downwind angles, strong performances in the high end, and overall, a ton of freedom on the water. Thanks to its high-speed air intake valves and their optimized shapes, this kite inflates really fast, and the wingtips fill almost instantly so you can be on the water before anybody else. Relaunching is always possible, even in very light wind and when an inflatable kite wouldn’t be able to rival. The TARGET is built from a long-lasting and robust 38g canopy material offering increased waterproofness, with insignia half-circle reinforcement on every attachment point for outstanding durability. Perfect for light to mid wind ranges, the TARGET is available in six sizes: 6, 7, 9, 11, 13 and 15 m². Riders who like to play around, do a lot of looping and narrow carving will love the smaller sizes of the range from 6 to 9m². Their huge power potential and late backstall allows you to ride with a 9m² already in 7-8 knots! Even high jumps are possible in very little wind. These sizes are super reactive, fly fast and offer great drift capabilities and easy handling. The bigger sizes are just as fun and will suit everyone who likes to freeride with the lightest breeze and who wants to have maximum lift and hangtime on jumps. On the 13 and 15m², the stability of the kite at the zenith has been fully optimized for ultra-low winds. While developed with foiling in mind, the TARGET also excels with a twin tip or for snowkiting. On a twin tip, the hangtime and lift is unbelievable, and this kite will take you back upwind easily and in no time. Navigation is intuitive and super easy, even in 9 knots. On snow, the TARGET accelerates fast and is extremely dynamic and responsive, bringing the maximum boost and lift for jumps and loops. Aim high with the TARGET, F-ONE’s new foil kite.
MAGMA - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Women Hooded - FZ 6,4mm
The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.