ROCKET FREE SURF CARBON
With the rise of new disciplines like K-Winging and pocket winging, which offer the freedom to ride with minimal bulk, some riders will naturally shift their focus toward ocean surfing, carving swells or bumps with style and precision. This board is built for exactly that: delivering the take-off support and stability you need, while being 100% dedicated to carving once you’re in the air. In this spirit, the ROCKET FREE SURF builds on everything that made the ROCKET SURF PRONE a success: an elongated outline that facilitates take-offs, optimized volume distribution, and a carefully tuned rake angle that creates perfect front-to-back foot pressure. Combined with reduced thickness, this provides excellent in-flight control. The straight rocker line ensures smooth acceleration, while the beveled rails reduce drag on touchdowns and enable more aggressive, committed turns. A slightly flatter nose improves both control and pumping efficiency, while the tapered nose and tail enhance maneuverability and help avoid unwanted contact with the water during carves. The rear step and kicktail free up water flow and boost pumping amplitude. Finally, the deck has been widened and reshaped slightly to improve foot placement and overall stability. Compared to the FREE DOWNWIND, the FREE SURF is a nimbler board thanks to its tapered nose and bottom outline, reduced thickness, and balanced foot pressure. This combination offers excellent pitch stability, even during the most powerful turns. This board is available in HD Foam Carbon Composite, a very light and stiff construction that enhances maneuverability and delivers an even more direct foil feel. More reactive when pumping, the carbon version does nonetheless share the same shape and program as the bamboo. Available from 5’2 to 6’11 (47L to 91L), the ROCKET FREE SURF CARBON will delight riders looking for a playful, maneuverable board with easy take-off and excellent glide to carve turn after turn, in any condition.
ROCKET FREE DOWNWIND
The ROCKET FREE range was developed to meet the needs of emerging disciplines focused on freefly and downwind. In these sports, freedom is key: the wing or paddle is only used to take off before being put aside, stashed or flagged out to ride swells and ocean energy alone. This calls for boards with more length to improve glide and acceleration, along with enough volume to start planing quickly and with stability. Since take-offs in these disciplines are indeed more challenging than in wing foiling, these boards give you the edge you need to get going smoothly. In this spirit, the ROCKET FREE DOWNWIND builds on the fundamentals of the MIDLENGTH board: natural front/rear balance, stability, and glide, while pushing further. Its longer shape and stretched outline increase glide even more. A rear step and kicktail help build speed quickly and make touchdowns smoother. The shallow cockpit keeps control underfoot without adding excess thickness, and the width-to-thickness ratio strikes the perfect balance between stability and acceleration, even when underpowered. Compared to the FREE SURF, the FREE DOWNWIND is a more stable board, featuring increased thickness, a wider nose and bottom surface, and squarer rails. The foot pressure is slightly front-biased, following the feel of classic F-ONE boards. It’s designed for riders who prioritize stability and easy take-offs, even in challenging or choppy conditions. Built with our Bamboo Deck Construction, the board stays light and responsive, while maintaining durability and strength. The feeling of the foil is very direct, and control is absolute throughout the entire session, even at high speeds. From 6’4” to 7’8” (85 to 124L), the ROCKET FREE DOWNWIND is accessible, versatile, and made for performance whether you're chasing offshore bumps or looking for easy planing in any condition.
STAB IC6 300
Versatile and progressive, the IC6 300 stabilizer is the perfect match for the IC6 950 and GRAVITY FCT front wings. Equipped with generous winglets, this stabilizer offers fantastic control with enough surface area that will help you feel fully confident in all situations. Versatile, intuitive, and predictable Large range of use Built with the IC6 technology, it is very durable and designed to be securely mounted on F-ONE fuselages. Its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you maneuver your foil more easily.
ROCKET WING ASC 5'0 (strap inserts)
Our entire ROCKET WING range makes it possible for any rider to experience the exhilarating freedom and sensations of wing foiling. The dimensions and shapes of our boards are unique and specific to the sport to ensure you make the best use of your wing and foil. The ROCKET WING ASC is ideal for all stages of wing foil progression and will provide stability from side to side, impressive responsiveness, and an easy and smooth transition into flight. This board features a straight, optimized rocker line for an easy take-off and an intuitive ride. The sharp beveled rail profile and double concave hull shape will help you be up and flying in no time, and you won’t be unsettled when occasionally hitting the water or during touchdowns. Using state-of-the-art ASC technology, the boards benefit from one of the most advanced molding processes in the world, which also reduces waste and increases shape accuracy. The ROCKET WING ASC are strong and durable. No matter how many dings, bumps or falls you suffer on the board, it will handle it. The size range has now been expanded to include five options, from 5’0 to 6’2, for even more fun on the water. The high volumes and generous widths make it possible for most riders to stand-up easily and to ensure that riding back to shore is possible, even if the wind drops. The ROCKET WING ASC will perform at all stages of wing foiling. The ROCKET WING ASC is equipped with a recessed bottom handle for easy carrying, a full pad, rail savers, and the Twin-Tracks system to connect with most foils on the market. The sizes 5’0, 5’3 and 5’5 also come with inserts for three footstraps.
PRO RACE CARBON (Tuttle + Twin tracks)
Designed with and for our best riders, this board is built to withstand the demands and pressure of racing. It is the fastest board we have designed to date and can be pushed to the limit. The HD Foam construction gives the PRO RACE CARBON an incredible resistance, all while maintaining a light weight. The board’s build has been reinforced for even more solidity, and the peel-ply finish on the deck provides grip with no extra weight. It is available in 4’7 size either only with a deep carbon Tuttle box, or with both the deep carbon Tuttle box and the Twin-Tracks system for optimal compatibility with any foil. Both versions are equipped with inserts for three footstraps.
MAGMA Women Meteor - FZ 4,3mm
Infos & Characteristics The MAGMA 4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MEN SEAFARER - FZ 3.2mm
Infos & Characteristics The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
ROCKET AIR
SWING V5
The SWING has been designed to provide the best possible sensations, while guaranteeing comfort and lightness. Building on the success of past editions, this fifth SWING is even more intuitive, benefiting from improved stability, ease of use and balance. Its incredible stability gives you total control of the foil so you can make the most of your time on the water. Its excellent upwind ability makes it easy to get a downwind run started, where its ideal neutral position in freefly lets you concentrate fully on your trajectories and the swell. The SWING’s compact design and reduced wingspan make the wing lighter, facilitate pumping for planing starts, bring exceptional maneuverability, and allow you to ride with your arms lower, perfect for smaller riders. This fifth SWING also inherits the forward traction of our latest STRIKE, transforming your session and getting you up on foil in an instant. The new design of this fifth SWING also leads to greater efficiency and comfort in the high end, while maintaining an excellent planing start thanks to an effective and intuitive pumping. The new radial cut and longer Load Diffuser minimize wing deformation and ideally distribute tensions. This SWING also features our innovative Sweep Control Panel that regulates trailing edge tension, ensuring stability, upwind abilities, speed and sustained performance overtime. This Sweep Control Panel, in HITEX 178g on this model, ideally reinforces the front part of the leading edge and helps control its rearward deformation, while maintaining lateral flex for comfort and energy transfer during pumping. The SWING excels in all types of wind and conditions, from low to high end, offering better control during acceleration and at high speeds, making it possible to handle choppy or rougher seas and make the most of the waves. The optimized strap positioning enables a single Carbon Boom to fit multiple sizes and wing models across the entire F-ONE wing range. Whether you’re chasing waves or downwinding, the SWING is the ideal choice thanks to its accessible performance and perfect balance, offering lightness, stability and comfort for a controlled and intuitive ride at all times.
CARBON BOOM - STRIKE V4
SEAFARER Neo top 2mm
We design our neoprene tops like we design our wetsuits: in 3D. It fits like a second skin so you can forget about it as soon as you’re on the water. We only use premium materials: our high-quality tops are made to be warm, because there’s nothing more frustrating than being cold in summer. It's a no-bullshit top with Manera’s renowned fit and construction that will be your favourite partner all summer long. X10D jersey: Being in direct contact with the skin, the inside jersey is a key part of the top. Our X10D fabric not only provides maximum stretch and lightness, but also a smooth, silky feeling on the skin. Designed in 3D: MANERA hood are directly designed on a model in a Kitesurf-specific position, for a much more natural feeling while riding.
PLANE IC6 950 V3 + PACK ALU MAST 85 CM
Made with our specific technology called Injected Carbon, our foils and stabilizers are very tough and durable. This technology makes our IC6 foils a lot more ding-resistant than conventional carbon wings. It has an aluminum insert at its core to provide extra resistance and better stiffness. The foil is bolted to the fuselage using two in-line and two offset screws, resulting in a geometry that ensures a very solid and rigid assembly.This foil is not only versatile but also very intuitive and predictable. The take-off is progressive and the ride in the air super smooth. You always have complete control of your speed and path and can make the most of your freeriding sessions.The front wing area is 950 cm² which is ideal for a wide range of use. With more lift, the IC6 V.3 is extremely easy to learn on, to improve fast, and to have fun no matter your skill level. Its elaborate design will enable you to ride at a very low speed or accelerate whenever needed while maintaining great maneuverability and a fantastic carving potential.The IC6 950 V.3 is designed for anyone looking to purchase a foil for the first time and progress with it, or simply to have a versatile setup able to bring high enjoyment on the water.The recommended fuselage and mast are made of aluminum. The mast plugs directly into the fuselage. The IC6 foil provides a stable and balanced setup and should be equipped with a 70 cm aluminum fuselage for kite foiling. An 80cm fuselage is also available for windfoiling.
PLUME
The PLUME marks the beginning of a new discipline, K-WING, an entirely new way of riding upwind to take full advantage of the swell. The first model created specifically for this sport, it combines a minimalistic design with optimized lightness, exceptional stability and pure glide, offering an unrivalled freefly and downwind experience. Light as a feather, the PLUME is F-ONE’s most freeing creation yet. The glide of a kite, combined with the comfort and practicality of a wing you can hold at arm's length, creates a new, revolutionary riding sensation. With a small leading edge, no central strut and a sleek C-shape profile, the PLUME is effortless to handle and easy to forget about when freeflying. Benefitting from a wide range of use, this K-Wing ensures stability, comfort, and an upwind angle on par with a wing, giving you maximum downwind time. Gliding feels effortless, as the PLUME pulls you forward without straining your arms. Its super light construction and superior upwind capability make it a favorite for deflaters. The minimal bridle system makes setup simple and safe, even offshore. Finally, the PLUME’s tiny leading edge can be deflated in the air and re-inflated at sea with a mini pump. Compact and lightweight, the PLUME is the perfect companion to make the most of the swell.
PLANE PHANTOM FCT 1280
Connecting waves while wing foiling, surfing or even downwinding is easy and fun with the PHANTOM CARBON foil. Carving is also part of its DNA, as connecting waves isn’t much fun if you can’t turn properly. By working on the lift distribution, arch shape, and other details, we reached a performing foil that can carve smooth curves on the waves and swells. The PHANTOM CARBON range is well-balanced and will satisfy a broad variety of riders thanks to its wide size range and huge potential. These foils have it all and do everything well: a satisfying glide, a great planing start, and amazing carving abilities. The PHANTOM 1280 provides a similar program to the 1480 but is more versatile. It carves better, goes faster, and is a good combination of planing and performance for wing foil. It is also suitable for lighter riders (< 70 kg). Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport.
Top Main V line with pulley (2A2 & 2A1) - 17m² - BREEZE V5
Top Main V line with pulley (2A2 & 2A1) - 17m² - BREEZE V5
FW SK8 V2 550
- New carbon layup for enhanced sensations and performance- Its outline makes it easy to turn and push hard during fast and controlled carves- The subtle design of the lobe between maneuverability and glide allows to surf freely while maintaining efficient pumping- The wingtips’ design is made to hit the foam and breach the wingtip without turbulence or ventilation- Its unique speed makes it a perfect foil for surfing from offshore swells to the shorebreak with a wing- Our monobloc construction guarantees rigidity, durability, and extraordinary glide New carbon layup. Thanks to in-depth research, rigorous testing and the know-how of our R&D team, the SK8’s new carbon layup delivers higher speeds while guaranteeing perfect control and greater stability. Turns become smoother, rail-to-rail transitions more precise, and the foil’s roll motion is improved, offering exceptional maneuverability. More predictable, the new SK8 delivers constant power, making it super intuitive to control. The use of High Modulus Carbon, integrated into F-ONE’s Dynamic Structural Design, leads to even more rigidity and dependability. Finally, this layup has been finely tuned and optimized so that each foil size can deliver the best performance. The SK8 has been designed to surf. Its overall shape provides a fine balance between glide and maneuverability, which allows the user to tear a wave apart and then pump back to the peak effortlessly. It doesn’t just turn. It carves. Maneuverability is nothing without power, speed and control. Lay into turns with ease and speed, push through the carve and see how the SK8 holds a steady line and delivers even more speed. It is meant to stay in the pocket. With specific wingtips design, the SK8 is able to hit white water without too many turbulences, allowing surf-style turns and breaching pretty much any part of the foil. Carve, pump, fly. Take the SK8 for a wing ride, and you’ll feel a fast, easy-to-go-upwind foil that you can surf all the way from the offshore swell until the impact zone.
FW PHANTOM FCT 1680
The PHANTOM FCT foils offer great balance, accessibility, and versatility, perfect for a wide range of riders. They excel in every aspect, whether it’s providing smooth glide, easy planing starts, or effortless carves through waves.Thanks to a work on the lift distribution, aspect ratio and shape, these foils allow you to pump easily so you can start planing quickly. The take-off is super smooth and the acceleration progressive, allowing you to confidently improve from one session to the next. Whether you’re wing foiling, surf foiling, or enjoying downwinding, the PHANTOM FCT foils promise performance and fun.The PHANTOM FCT 1680 is ideal for low-wind conditions or riders of a larger stature. This front wing is large and stable, but that remains maneuverable and that will bring extra power and performance in light wind.These foils are built with the Foil Compression Technology, a F-ONE innovation that offers impressive mechanical properties. Our FCT construction has been further improved and refined; these new PHANTOM FCT foils benefit from an additional carbon ply integrated into the construction, hence increasing their resistance and stiffness for even more control and stability.The fuselage can be directly connected to the F-ONE aluminum mast of the desired length. The setup and disassembly are also extremely easy, and the whole is very travel friendly.All in all, this tough and ding-resistant technology leads to one of the most accessible and scalable foil setups, all while keeping the DNA of what makes the PHANTOM foils so successful.
4-PT FOIL MOUNT ADAPTER
The 4-point foil mount adapter is specifically designed to work with the ROCKET AIR’s 4-point system. This adapter lets you mount any top plate to the ROCKET AIR, and thus allows you to ride this board with any foil on the market. No screws are included with this adapter.
ALU MAST 75 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).