HM CARBON MAST 14 - 105 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
PLANE ESCAPE HM CARBON 430
Designed to foil at high speeds with full control no matter the conditions, these foils will lead to incredible performances, but their “raisons d’être” are first and foremost to provide the most exhilarating ride on the water. Such a high level of performance is only possible by using a Full Monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded together in a single piece made of pre-preg carbon. This consequently reduces the hydrodynamic drag and results in a stiff and solid foil. The newly added High Modulus Carbon fiber layup leads to even more rigidity and dependability that will drive you to incredible feats in each of your session. In light or strong winds and whether kite foiling or wing foiling, the ESCAPE HM CARBON is a playful, nimble, and enjoyable hydrofoil that delivers an amazing glide with a terrific speed potential and utmost control. The pro wing foilers will also appreciate its quality and sophistication as they push the limits of this discipline. The ESCAPE HM CARBON is available in three sizes: 630 cm², 530 cm² and 430 cm², our newest size. With an aspect ratio of 7.8, the 430 will let the experts experience thrilling speeds and tackle massive waves. It is also a great fit for riders of a smaller stature or to wing foil in strong winds. It is similar to the 530cm² in shape and outline, but has a thinner, less curved profile that allows it to go at high speeds without overpowering. The 430 sees a slight increase in its aspect ratio to stabilize it at high speeds and to increase its glide capabilities.
M8-16mm tapered head screws (A4 - T40 torx) x4
M8-16mm tapered head screws (A4 - T40 torx) x4
FW EAGLE HM CARBON 890
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping.Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions.Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast.The EAGLE is available in seven sizes, from 690 cm² to 1290 cm².The 690 cm² and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records.The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide.The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well.* Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
FW EAGLE HM CARBON 990
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping.Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions.Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast.The EAGLE is available in seven sizes, from 690 cm² to 1290 cm².The 690 cm² and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records.The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide.The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well.* Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
FW EAGLE HM CARBON 1090
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping.Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions.Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast.The EAGLE is available in seven sizes, from 690 cm² to 1290 cm².The 690 cm² and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records.The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide.The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well.* Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
FW EAGLE HM CARBON 1290
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping.Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions.Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast.The EAGLE is available in seven sizes, from 690 cm² to 1290 cm².The 690 cm² and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records.The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide.The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well.* Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
FW EAGLE HM CARBON 1190
The EAGLE is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping.Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions.Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast.The EAGLE is available in seven sizes, from 690 cm² to 1290 cm².The 690 cm² and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records.The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide.The 1090 cm², 1190 cm² and 1290 cm² bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well.* Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
ALU MAST 75 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
ALU MAST 85 CM
The F-ONE aluminum mast can be used for all disciplines: kite, surf foil, wing foil, SUP foil and windfoil. The profile is extruded with precision from 6063 aluminum block. The shape of its section benefits from our years of experience in foiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminum mast can be used on every foil of the range, and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 80 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
FW IC6 950 V3
Made with our specific technology called Injected Carbon, our foils and stabilizers are very tough and durable. This technology makes our IC6 foils a lot more ding-resistant than conventional carbon wings. It has an aluminum insert at its core to provide extra resistance and better stiffness. The foil is bolted to the fuselage using two in-line and two offset screws, resulting in a geometry that ensures a very solid and rigid assembly.This foil is not only versatile but also very intuitive and predictable. The take-off is progressive and the ride in the air super smooth. You always have complete control of your speed and path and can make the most of your freeriding sessions.The front wing area is 950 cm² which is ideal for a wide range of use. With more lift, the IC6 V.3 is extremely easy to learn on, to improve fast, and to have fun no matter your skill level. Its elaborate design will enable you to ride at a very low speed or accelerate whenever needed while maintaining great maneuverability and a fantastic carving potential.The IC6 950 V.3 is designed for anyone looking to purchase a foil for the first time and progress with it, or simply to have a versatile setup able to bring high enjoyment on the water.The recommended fuselage and mast are made of aluminum. The mast plugs directly into the fuselage. The IC6 foil provides a stable and balanced setup and should be equipped with a 70 cm aluminum fuselage for kite foiling. An 80cm fuselage is also available for windfoiling.
ALU FUSELAGE 70
The F-ONE Alu Fuselage 70 provides an ultra-rigid wing connection. Built in aluminum, it is very strong and allows the suitable front wings and stabilizers to be connected effortlessly. • Super stiff wing connection• Solid aluminum construction• Slender and reinforced hydrodynamic section This fuselage connects directly to F-ONE aluminum masts. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. The aluminum profiles make the most of this homogeneous material to offer perfect rigidity, both in torsion and in bending. This fuselage is recommended for the IC6 650 V3 front wing. It is supplied with the necessary screws to connect the front wing (2x M6-25mm and 2x M6-15mm), the mast (2x M6-25mm) and the stabilizer (2x M6-15mm). You cannot use a carbon mast on this fuselage. WEIGHT: 0.18 kg
Bladder S1 - STRIKE V5 ALUULA
Bladder S1 - STRIKE V5 ALUULA
Bladder LE - STRIKE V5 ALUULA
Bladder LE - SWING V5
Bladder S1 - STRIKE V5 CWC ALUULA
Bladder S1 - STRIKE V5 CWC ALUULA
Bladder LE - ORIGIN V2
Bladder S1 - SWING V5
Bladder S1 - SWING V5