FW JAM HM CARBON 1600
With only just a few pumps, you’ll be out of the water and gliding along at speed in no time with the JAM. Even if you stop pumping for a few seconds, it keeps gliding. The distinct design, angle of attack and profile reduce the induced drag even further and bring even more efficiency and performance. The wingtips have been designed to provide a decent maneuverability so the JAM is not only a pumping machine, but also fun to cruise around on. Successfully combining early take-off abilities with good speed, the JAM delivers a smooth and precise ride. Its high aspect ratio and extreme efficiency at low speeds also make it ideal for wing foiling and downwinding in marginal conditions. The JAM can gain speed if necessary, allowing the rider to go faster, to use it in light wind winging conditions, and to even ride small waves with ease. Built using the Monobloc structure with pre-preg carbon, this foil is both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and stability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The JAM is available in three sizes: 1400 cm², 1600 cm² and 1900 cm². The JAM 1400 cm² will be the perfect foil for experienced dockstart/pumping riders, for beginners in SUP downwind, for winging in light wind, and finally for surfing micro-swells in surf foil. The 1600 cm² is ideal to wing foil or SUP foil in marginal conditions and light winds, or for riders who already know how to dock start. It is also the perfect foil to learn how to SUP downwind. The 1900 cm² is great for dock-starts, pumping in flat waters, and for riders of a bigger stature. This foil is recommended with the Monobloc Tail Pumping XXS 200, which offers exceptional pumping abilities and a fantastic glide. The JAM caters to all levels of foilers, whether it’s beginners looking to get into pump foil, or more advanced riders wanting an efficient foil that will deliver in this discipline and minimal conditions. Grab your group of friends and enjoy a JAM session anytime, anywhere!
FW EAGLE X UHM CARBON 900
The breathtaking speed of our famous EAGLE has been multiplied; this new foil gains both average and top speed. With the EAGLE X, you’ll harness the ocean’s energy like never before and be amazed at its incredible performance. The EAGLE X is optimized to reach the highest possible speeds while maintaining a very high average speed. Its low end has been specially designed for easy take-offs and comfort in the air. Its glide allows you to fly without stalling, even if you make a small mistake. Instead of focusing on the low or high end, we’ve worked on increasing the overall speed range of this foil. As a result, the EAGLE X can go very fast as well as very slow, enabling comfortable and easy downwinders with a high average speed. The EAGLE X’s highly recognizable outline has been particularly refined. Most of the foil’s surface area is distributed in the center, creating fairly narrow wingtips. This distribution of surface area ensures excellent maneuverability, especially for such a high AR. Hence, the EAGLE X isn’t just a fast foil, it’s also a fun foil to carve with! Moreover, the narrow wingtips make it easy to get the tips out without turbulence or cavitation. Finally, the wingtips are still fitted with winglets to reduce induced drag to a minimum. The EAGLE X offers a fantastic glide, capturing the slightest energy from the ocean and using it to move forward. It’s capable of weaving through small chops as well as speed across long swells, allowing you to wander and explore during your runs like never before. Every pumping movement is transformed into forward energy, making this foil painless to ride, even for a few hours. Built using the Monobloc structure with pre-preg carbon, the foil is both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The Ultra High Modulus (UHM) carbon provides maximum stiffness for greater performance and incredible control thanks to instant feedback. The TITAN connection allows to plug in either an aluminum or carbon mast. The EAGLE X is best suited to advanced users looking for performance or new glide sensations. Whether wing foiling or SUP foiling, this foil promises a whole new range of sensations that only it can offer. * Downwinding requires physical preparation, proper security devices (ie. leash, flashlight, safety vest), and assistance at sea. Please do not attempt any downwinders alone nor without proper training.
MONOBLOC TAIL XXS 141 CARVING W
Unlike the larger sizes in the Carving range, these new Monobloc Tails feature longer fuselages. This increases pitch stability, enabling you to push hard into the turns with confidence. Their reduced surface area also contributes to greater speed, responsiveness, and maneuverability. This makes it easier to carve and play closer to the pocket of the wave. The main difference with the rest of the Carving range lies in their new profile. The Carving W profile was built to provide the best possible pitch stability and steady lift. No matter the speed, no matter how much you push in the carves, the Carving W tails will hold and stay stable. They are more difficult to pump and hence are more directed toward winging and tow-in. The High Modulus Carbon fiber layup used for these Monobloc Tails leads to even more rigidity and dependability that will propel you to incredible performances in each session. These Monobloc Tails will delight riders who want to push their limits.
MONOBLOC TAIL XS 161 CARVING W
Unlike the larger sizes in the Carving range, these new Monobloc Tails feature longer fuselages. This increases pitch stability, enabling you to push hard into the turns with confidence. Their reduced surface area also contributes to greater speed, responsiveness, and maneuverability. This makes it easier to carve and play closer to the pocket of the wave. The main difference with the rest of the Carving range lies in their new profile. The Carving W profile was built to provide the best possible pitch stability and steady lift. No matter the speed, no matter how much you push in the carves, the Carving W tails will hold and stay stable. They are more difficult to pump and hence are more directed toward winging and tow-in. The High Modulus Carbon fiber layup used for these Monobloc Tails leads to even more rigidity and dependability that will propel you to incredible performances in each session. These Monobloc Tails will delight riders who want to push their limits.
MONOBLOC TAIL XS 160 CARVING
Aspect ratio: 6.8 Maneuverability, speed, fast pumping and a looser, more snappy feeling Monobloc construction for better stiffness and reduced turbulences With a thin profile and higher aspect ratio, this Carving range is the way to go if you need speed and maneuverability. Using the Monobloc Tails will provide a looser, more snappy feeling, as well as a faster pumping pace. The monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, more stable, and faster. The monobloc also removes two screws; you’ll be on the water faster! The High Modulus Carbon fiber layup used for these Monobloc Tails leads to even more rigidity and dependability that will propel you to incredible performances in each session.
MONOBLOC TAIL XXS 170 DW
Monobloc Tail DW XXXS 190 + Monobloc Tail DW XXS 210 The Monobloc Tails DW provide improved speed, greater stability and better forward projection, greatly enhancing the efficiency and fun of your downwinds, as you perform better with less fatigue. The monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, more stable, and faster. The monobloc also removes two screws: you’ll be on the water faster! The High Modulus Carbon fiber layup used for this Monobloc Tail leads to even more rigidity and dependability that will propel you to incredible performances in each session. Monobloc Tail DW XS 145 + Monobloc Tail DW XXS 170 Compared to the larger sizes in the DW range, the new XS 145cm² and XXS 170cm² feature longer fuselages. This provides pitch stability, which is a great advantage in strong wind conditions where the foil will cross bumps without jolting or over-power. The longer fuselage also offers better forward projection and more efficient pumping. Their reduced surface area contributes to greater speed, responsiveness, and maneuverability. This makes the foil more playful, allowing you to better connect bumps and have more fun carving. Monobloc Tail DW XS 135 + Monobloc Tail DW XXS 155 With a high aspect ratio (10.0), these new Monobloc Tails DW are optimized to provide a greater glide, a smoother take-off and improved low-end performance, while ensuring a stable, comfortable ride and excellent stability at speed. The longer fuselages provide pitch stability, which is a great advantage in strong wind conditions where the foil will cross bumps without jolting or over-power. It also offers better forward projection and more efficient pumping. Their reduced surface area contributes to greater speed and responsiveness. This makes the foil more playful, allowing you to better connect bumps and have more fun carving. The Ultra High Modulus (UHM) Carbon layup provides maximum stiffness for greater performance and incredible control thanks to instant feedback.
Bladder S1 - 9m² - BREEZE V5
Bladder S1 - 9m² - BREEZE V5
FW PHANTOM FCT 1480
The PHANTOM FCT foils offer great balance, accessibility, and versatility, perfect for a wide range of riders. They excel in every aspect, whether it’s providing smooth glide, easy planing starts, or effortless carves through waves.Thanks to a work on the lift distribution, aspect ratio and shape, these foils allow you to pump easily so you can start planing quickly. The take-off is super smooth and the acceleration progressive, allowing you to confidently improve from one session to the next. Whether you’re wing foiling, surf foiling, or enjoying downwinding, the PHANTOM FCT foils promise performance and fun.The PHANTOM FCT 1480 combines efficiency and accessibility. Its lift allows you to glide endlessly while having fun thanks to its incredible maneuverability and stability. It is an ultra-versatile foil that will allow you to surf in waves < 1m50, venture downwind, wing foil, or try yourself at wakefoiling… It does everything well, even in weak conditions.These foils are built with the Foil Compression Technology, a F-ONE innovation that offers impressive mechanical properties. Our FCT construction has been further improved and refined; these new PHANTOM FCT foils benefit from an additional carbon ply integrated into the construction, hence increasing their resistance and stiffness for even more control and stability.The fuselage can be directly connected to the F-ONE aluminum mast of the desired length. The setup and disassembly are also extremely easy, and the whole is very travel friendly.All in all, this tough and ding-resistant technology leads to one of the most accessible and scalable foil setups, all while keeping the DNA of what makes the PHANTOM foils so successful.
FW PHANTOM FCT 1680
The PHANTOM FCT foils offer great balance, accessibility, and versatility, perfect for a wide range of riders. They excel in every aspect, whether it’s providing smooth glide, easy planing starts, or effortless carves through waves.Thanks to a work on the lift distribution, aspect ratio and shape, these foils allow you to pump easily so you can start planing quickly. The take-off is super smooth and the acceleration progressive, allowing you to confidently improve from one session to the next. Whether you’re wing foiling, surf foiling, or enjoying downwinding, the PHANTOM FCT foils promise performance and fun.The PHANTOM FCT 1680 is ideal for low-wind conditions or riders of a larger stature. This front wing is large and stable, but that remains maneuverable and that will bring extra power and performance in light wind.These foils are built with the Foil Compression Technology, a F-ONE innovation that offers impressive mechanical properties. Our FCT construction has been further improved and refined; these new PHANTOM FCT foils benefit from an additional carbon ply integrated into the construction, hence increasing their resistance and stiffness for even more control and stability.The fuselage can be directly connected to the F-ONE aluminum mast of the desired length. The setup and disassembly are also extremely easy, and the whole is very travel friendly.All in all, this tough and ding-resistant technology leads to one of the most accessible and scalable foil setups, all while keeping the DNA of what makes the PHANTOM foils so successful.
4-PT FOIL MOUNT ADAPTER
The 4-point foil mount adapter is specifically designed to work with the ROCKET AIR’s 4-point system. This adapter lets you mount any top plate to the ROCKET AIR, and thus allows you to ride this board with any foil on the market. No screws are included with this adapter.
CARBON MAST 16 - 80 CM
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. It features both a new integrated top plate and TITAN mast foot at the bottom. This full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Available in 80cm and 85cm, this mast is perfect for all things foiling, and offering top-of-the-range performance in all conditions. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.
CARBON MAST 16 - 85 CM
The Carbon Mast 16mm thick is intrinsically very stiff and offers the best compromise between rigidity and glide. It features both a new integrated top plate and TITAN mast foot at the bottom. This full Monobloc construction brings absolute rigidity and helps reduce drag to a minimum, leading to easier starts and the utmost connection between the foil and the board. Every small steering and input will immediately translate down to the foil, and the feedback will be just as direct. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Our specific layup leads to the best compromise between bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Available in 80cm and 85cm, this mast is perfect for all things foiling, and offering top-of-the-range performance in all conditions. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. Let it glide with the F-ONE Carbon Mast 16, an outstanding and efficient mast that offers the most direct feeling, easy turns, excellent maneuvering, and effective pumping.
HM CARBON MAST 14 - 85 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
HM CARBON MAST 14 - 95 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
HM CARBON MAST 14 - 105 CM
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board. The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport. With a size range going from 75cm, 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves. This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot. Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
PLANE ESCAPE HM CARBON 430
Designed to foil at high speeds with full control no matter the conditions, these foils will lead to incredible performances, but their “raisons d’être” are first and foremost to provide the most exhilarating ride on the water. Such a high level of performance is only possible by using a Full Monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded together in a single piece made of pre-preg carbon. This consequently reduces the hydrodynamic drag and results in a stiff and solid foil. The newly added High Modulus Carbon fiber layup leads to even more rigidity and dependability that will drive you to incredible feats in each of your session. In light or strong winds and whether kite foiling or wing foiling, the ESCAPE HM CARBON is a playful, nimble, and enjoyable hydrofoil that delivers an amazing glide with a terrific speed potential and utmost control. The pro wing foilers will also appreciate its quality and sophistication as they push the limits of this discipline. The ESCAPE HM CARBON is available in three sizes: 630 cm², 530 cm² and 430 cm², our newest size. With an aspect ratio of 7.8, the 430 will let the experts experience thrilling speeds and tackle massive waves. It is also a great fit for riders of a smaller stature or to wing foil in strong winds. It is similar to the 530cm² in shape and outline, but has a thinner, less curved profile that allows it to go at high speeds without overpowering. The 430 sees a slight increase in its aspect ratio to stabilize it at high speeds and to increase its glide capabilities.